Outcomes of and treatment planning considerations for a hybrid technique delivering proton pencil-beam scanning radiation to women with metal-containing tissue expanders undergoing post-mastectomy radiation.

Following mastectomy, immediate breast reconstruction often involves the use of temporary tissue expanders (TEs). TEs contain metallic ports (MPs), which complicate proton pencil-beam scanning (PBS) planning. A technique was implemented for delivering PBS post-mastectomy radiation (PMRT) to patients with TEs and MPs. A protocol utilizing a hybrid single- and multi-field optimization (SFO, MFO) technique was developed. Plans were robustly optimized using a Monte Carlo algorithm. A CTV_eval structure including chest wall (CW) and regional nodal (RNI) targets and excluding the TE was evaluated. Organ at risk (OAR) dosimetry and acute toxicities were analyzed. Twenty-nine women were treated with this technique. A 2-field SFO technique was used superior and inferior to the MP, with a 3 or 4-field MFO technique used at the level of the MP. Virtual blocks were utilized so that beams did not travel through the MP. A port-to-CW distance of 1 cm was required. Patients underwent daily image-guidance to ensure the port remained within a 0.5 cm internal planning volume (ITV). Median RT dose to CTV_eval was 50.4 Gy (45.0-50.4). Median 95% CTV_eval coverage was 99.5% (95-100). Optically stimulated luminescent dosimeter (OSLD) readings were available for 8 patients and correlated to the dose measurements in the treatment planning system (TPS); median OSLD ratio was 0.99 (range, 0.93-1.02). Delivering PMRT with PBS for women with metal-containing TEs using a hybrid SFO/MFO technique is feasible, reproducible, and achieves excellent dose distributions. Specialized planning and image-guidance techniques are required to safely utilize this treatment in the clinic.

DeCesaris CM ，Mossahebi S ，Jatczak J ，Rao AD ，Zhu M ，Mishra MV ，Nichols E ... -  《-》

Technical Note: Clinical modeling and validation of breast tissue expander metallic ports in a commercial treatment planning system for proton therapy.

To validate breast tissue expander metallic port (MP) models in a commercial treatment planning system (TPS) in proton pencil beam scanning (PBS) treatments for breast cancer patients with breast tissue expanders. Three types of MPs taken out of a Mentor CPX4, a Natrelle 133, and a PMT Integra breast tissue expanders and a 650 cc saline filled Mentor CPX4 expander were placed on top of acrylic slabs, and scanned using a Siemens Somatom Definition AS Open RT CT scanner. Structure templates for each of the MPs were designed within Eclipse TPS. The CT numbers for the metallic parts were overridden to reflect measured or calculated relative proton stopping powers (RPSPs). Mock targets were contoured in acrylic to represent postmastectomy chest-wall radiation therapy (PMRT) targets. Plans with different beam incident angles were optimized using the Eclipse TPS to deliver uniform prescription dose to the target using Hitachi Probeat-V PBS beams. Eclipse calculated doses and an in-house Monte Carlo (MC) code calculated doses were compared to the measured Gafchromic EBT3 film doses in acrylic. TPS/MC and film dose comparison results showed that (1) 3%/2 mm/10% threshold Gamma pass rates were better than 90.8% in the acrylic target region for all plans; (2) comparing TPS and film doses for the individual beam plans in the MP dose shadow areas, the area with dose difference above 5% ([ΔA] 5%) ranged from 1.1 to 5.0 cm2 , and the maximum dose difference ([ΔD] 0.01 cm2 ) ranged from 12.5% to 25.0%; (3) comparing MC and film doses for the individual beam plans in the MP dose shadow areas, the (ΔA) 5% varied from 1.1 to 2.9 cm2 and (ΔD) 0.01 cm2 varied from 8.5% to 24.2%; (4) for a plan composed of three individual beams treating through the Mentor CPX4 expander, the TPS (ΔA) 5% was less than 0.13 cm2 , and the (ΔD) 0.01 cm2 was less than 6% in the MP dose shadow areas. It is feasible to treat patients with tissue expanders using multiple PBS beams using a structure template with CT number overridden to represent the measured/calculated RPSP for MPs for PBS treatment planning. MC dose was more accurate than analytical dose in the areas with high dose gradient caused by the density heterogeneity of the breast tissue expander MPs.

Kang Y ，Shen J ，Bues M ，Hu Y ，Liu W ，Ding X ... -  《-》

Assessing the Need for Adjusted Organ-at-Risk Planning Goals for Patients Undergoing Adjuvant Radiation Therapy for Locally Advanced Breast Cancer with Proton Radiation.

Locally advanced breast cancer requires surgical management via lumpectomy or mastectomy with or without systemic therapy followed by chest wall or breast (CW) and comprehensive nodal irradiation (CNI). Radiation (RT) dose constraints for the heart and ipsilateral lung have been developed based on photon RT. Proton therapy (PBT) can deliver significantly lower doses of RT to these organs-at-risk (OARs) and may warrant adjustments to OAR planning goals. The RT plans of consecutive patients undergoing adjuvant CW-CNI RT with PBT within a single center were reviewed. A inital treatment volume, comprised of CW/intact breast + CNI (CTV_init) structure, including the CW and CNI but excluding any boost plans was analyzed. Frequency distributions were generated based on doses received by the heart, lungs, and esophagus for validated dosimetric parameters. Frequency distributions were generated and then stratified by laterality and compared using the Kruskal-Wallis H test. The 75th, 85th, and 95th percentiles for each dosimetric parameter were calculated, overall and by laterality. The 75th percentile (Q3), was used as a suggested primary goal, and the 95th percentile was used as a suggested secondary goal. One hundred and seventy-two plans were analyzed. Forty-nine plans were right-sided, 107 were left-sided, and 16 were bilateral. The overall Q3 of the mean and V25 of the heart were 1.5 Gy and 1.7%, respectively. The mean and V25 to the heart differed significantly by laterality. Pulmonary values were similar to current recommendations. For all lateralites, the median volume of the esophagus receiving 70% prescription dose was ≤1 cm3. We present the first dosimetric study providing complete OAR dose-volume histograms data for patients undergoing adjuvant pencil-beam scanning-PBT for locally advanced breast cancer, with detailed information on central tendencies, ranges and distributions of data. We have provided suggested planning goals and metrics for the lungs, heart, and esophagus; the latter 2 differing significantly from current Quantitative Analysis of Normal Tissue Effects in the Clinic (QUANTEC) constraints and classical photon goals.

DeCesaris CM ，Pollock A ，Zhang B ，Poirier Y ，Kowalski E ，Paulosky K ，Mishra MV ，Nichols E ... -  《-》

In vivo dosimetric impact of breast tissue expanders on post-mastectomy radiotherapy.

Temporary tissue expanders with metallic ports for gradual saline injection are increasingly employed to facilitate breast reconstruction after post-mastectomy radiotherapy (PMRT). Treatment beams therefore pass through a high-density rare-earth magnet. Measurements ex vivo suggest attenuation of dose to the skin and chest wall at clinical risk of relapse. The purpose of the study was to quantify the resulting dose reduction in vivo, compared with treatment planning system (TPS). Sixteen patients receiving PMRT had in vivo dosimetry prospectively performed with ethics board approval. Port was located within the expanded chest wall using the planning CT scan. Strips of radiochromic film were laid on the skin surface underneath the bolus. To aid interpretation, ex vivo measurements were also performed, including comparison with TPS predictions. An average 7% reduction in dose to skin surface was measured in 15 of 16 patients. This was reproducibly located in the 'shadow' of the magnet, corresponding to each of the paths of the medial and lateral tangents. The average area was 1.07 cm(2) (range 0.39 cm(2) to 2.36 cm(2)). Ex vivo measurements confirmed attenuation of the beam in the shadow of the port. The surface area of the 'cold-spot' varied with angle of the beam relative to the metallic port. Dose attenuation in vivo differed from that predicted by the TPS. Dose is attenuated in the 'shadow' of the tissue expander port in patients receiving PMRT. This is likely to be clinically insignificant for most, but centres should undertake appropriate measurements before utilising TPS predictions.

Gee HE ，Bignell F ，Odgers D ，Gill S ，Martin D ，Toohey J ，Carroll S ... -  《-》

Dose perturbation caused by metallic port in breast tissue expander in proton beam therapy.

Proton beam treatment is being looked favourably now in breast treatment. Tissue expanders are often placed after mastectomy that contains metallic port for saline injection which produces dose perturbations in proton beam therapy with uncertain dosimetry. Dose perturbation for a stainless-steel injection port from a breast implant is investigated in this study. Measurements, Monte-Carlo simulation, and calculated dose distribution of plans based on kVCT and MVCT images are compared. Treatment plans are performed on kVCT and MVCT images to observe the effect of metal artifact from the breast implant. The kVCT based plan underestimates the beam range due to the overestimated water equivalent thickness of the metal ports as a result of image degradation. Compared to the measurement with metal port in the proton beam, the MVCT-based treatment planning provides more accurate dose calculation than the kVCT-based results. The dose perturbation factor calculated from MVCT planning is within 10% of the measurement results while HU corrected kVCT plan still shows dose difference as large as 100% due to the incorrect range pull back calculation caused by the misrepresentation of the volume between the plastic cap and the stainless-steel base. The dose enhancement observed at the metal and solid water interface is as large as 15%, which needs to be accounted for in the planning process if there is a clinical concern. Dose reduction as large as 16% is observed with depth from 1 cm to 4 cm underneath the thickest part of the metallic port whereas lateral dose perturbation is also seen up to 7 mm. The measurement data are supported by the Monte-Carlo simulated results with a maximum dose difference of 6%. It is concluded that if proton beam is used with metallic port, MVCT imaging data is recommended. In lieu of MVCT, DECT, CT scanner with metal artifact reduction software or in the very least, extended HU range should be used to reduce the streaking artifact as well as to produce a more accurate image of the metallic port.

Zhao L ，Moskvin VP ，Cheng CW ，Das IJ ... -  《Biomedical Physics & Engineering Express》