Set Up and Utilization of a Three-Dimensional In Vitro Bioreactor System for Human Intestinal Studies and Microbial Co-Cultures.

The study of human intestinal physiology and host-microbe interactions is crucial for understanding gastrointestinal health and disease. Traditional two-dimensional cell culture models lack the complexity of the native intestinal environment, limiting their utility in studying intestinal biology. Here, we present a detailed protocol for the set up and utilization of a three-dimensional (3D) in vitro bioreactor system for human intestinal studies and bacterial co-culture. This article outlines the design and assembly of the bioreactor system, scaffold fabrication, bacterial culture techniques, analysis methods, and troubleshooting tips. By providing step-by-step instructions, the goal is to enable other laboratories to utilize physiologically relevant tissue models of the human intestine, incorporating key features, such as nutrient flow, multiple human cell types, 3D architecture, and microbial communities. The incorporation of commensal bacteria into the bioreactor system allows for the investigation of complex host-microbe interactions, providing insight into gastrointestinal health and pathology. This article serves as a comprehensive resource for scientists seeking to advance their understanding of intestinal biology toward the development of novel therapeutic strategies for gastrointestinal disorders. © 2024 Wiley Periodicals LLC. Basic Protocol 1: Scaffold design Basic Protocol 2: Intestinal cell culture: Caco2 cells Basic Protocol 3: Intestinal cell culture: organoids Basic Protocol 4: Bioreactor design and set up Basic Protocol 5: Bacteria in 3D bioreactor set up Basic Protocol 6: Bacteria and drug dosing.

Rudolph SE ，Bethi E ，Iglesias-Ledon L ，Kumarasinghe HU ，Da'darah O ，Salgam GK ，Vieira KC ，Chen Y ，Kaplan DL ... -  《-》

3D Oral and Cervical Tissue Models for Studying Papillomavirus Host-Pathogen Interactions.

Human papillomavirus (HPV) infection occurs in differentiating epithelial tissues. Cancers caused by high-risk types (e.g., HPV16 and HPV18) typically occur at oropharyngeal and anogenital anatomical sites. The HPV life cycle is differentiation-dependent, requiring tissue culture methodology that is able to recapitulate the three-dimensional (3D) stratified epithelium. Here we report two distinct and complementary methods for growing differentiating epithelial tissues that mimic many critical morphological and biochemical aspects of in vivo tissue. The first approach involves growing primary human epithelial cells on top of a dermal equivalent consisting of collagen fibers and living fibroblast cells. When these cells are grown at the liquid-air interface, differentiation occurs and allows for epithelial stratification. The second approach uses a rotating wall vessel bioreactor. The low-fluid-shear microgravity environment inside the bioreactor allows the cells to use collagen-coated microbeads as a growth scaffold and self-assemble into 3D cellular aggregates. These approaches are applied to epithelial cells derived from HPV-positive and HPV-negative oral and cervical tissues. The second part of the article introduces potential downstream applications for these 3D tissue models. We describe methods that will allow readers to start successfully culturing 3D tissues from oral and cervical cells. These tissues have been used for microscopic visualization, scanning electron microscopy, and large omics-based studies to gain insights into epithelial biology, the HPV life cycle, and host-pathogen interactions. © 2020 Wiley Periodicals LLC. Basic Protocol 1: Establishing human primary cell-derived 3D organotypic raft cultures Support Protocol 1: Isolation of epithelial cells from patient-derived tissues Support Protocol 2: Growth and maintenance of primary human epithelial cells in monolayer culture Support Protocol 3: PCR-based HPV screening of primary cell cultures Basic Protocol 2: Establishing human 3D cervical tissues using the rotating wall vessel bioreactor Support Protocol 4: Growth and maintenance of human A2EN cells in monolayer culture Support Protocol 5: Preparation of the slow-turning lateral vessel bioreactor Support Protocol 6: Preparation of Cytodex-3 microcarrier beads Basic Protocol 3: Histological assessment of 3D organotypic raft tissues Basic Protocol 4: Spatial analysis of protein expression in 3D organotypic raft cultures Basic Protocol 5: Immunofluorescence imaging of RWV-derived 3D tissues Basic Protocol 6: Ultrastructural visualization and imaging of RWV-derived 3D tissues Basic Protocol 7: Characterization of gene expression by RT-qPCR.

Jackson R ，Maarsingh JD ，Herbst-Kralovetz MM ，Van Doorslaer K ... -  《-》

A novel system to culture human intestinal organoids under physiological oxygen content to study microbial-host interaction.

Mechanistic investigation of host-microbe interactions in the human gut are hindered by difficulty of co-culturing microbes with intestinal epithelial cells. On one hand the gut bacteria are a mix of facultative, aerotolerant or obligate anaerobes, while the intestinal epithelium requires oxygen for growth and function. Thus, a coculture system that can recreate these contrasting oxygen requirements is critical step towards our understanding microbial-host interactions in the human gut. Here, we demonstrate Intestinal Organoid Physoxic Coculture (IOPC) system, a simple and cost-effective method for coculturing anaerobic intestinal bacteria with human intestinal organoids (HIOs). Using commensal anaerobes with varying degrees of oxygen tolerance, such as nano-aerobe Bacteroides thetaiotaomicron and strict anaerobe Blautia sp., we demonstrate that IOPC can successfully support 24-48 hours HIO-microbe coculture. The IOPC recapitulates the contrasting oxygen conditions across the intestinal epithelium seen in vivo. The IOPC cultured HIOs showed increased barrier integrity, and induced expression of immunomodulatory genes. A transcriptomic analysis suggests that HIOs from different donors show differences in the magnitude of their response to coculture with anaerobic bacteria. Thus, the IOPC system provides a robust coculture setup for investigating host-microbe interactions in complex, patient-derived intestinal tissues, that can facilitate the study of mechanisms underlying the role of the microbiome in health and disease.

Fofanova TY ，Karandikar UC ，Auchtung JM ，Wilson RL ，Valentin AJ ，Britton RA ，Grande-Allen KJ ，Estes MK ，Hoffman K ，Ramani S ，Stewart CJ ，Petrosino JF ... -  《PLoS One》

The Robogut: A Bioreactor Model of the Human Colon for Evaluation of Gut Microbial Community Ecology and Function.

The human colon is inhabited by a complex community of microbes. These microbes are integral to host health and physiology. Understanding how and when the microbiome causally influences host health will require microbiome models that can be tightly controlled and manipulated. While in vivo models are unrivalled in their ability to study host-microbial interplay, in vitro models are gaining in popularity as methods to study the ecology and function of the gut microbiota, and benefit from tight controllability and reproducibility, as well as reduced ethical constraints. In this set of protocols, we describe the Robogut, a single-stage bioreactor system designed to replicate the conditions of the distal human colon, to culture whole microbial communities derived from stool and/or colonic biopsy samples, with consideration of methods to create culture medium formulations and to build, run, and sample the bioreactor apparatus. Cleaning and maintenance of the bioreactor system are also described. © 2023 The Authors. Current Protocols published by Wiley Periodicals LLC. Basic Protocol 1: Growth medium preparation Support Protocol 1: Preparing medium supplements Basic Protocol 2: Preparing the bioreactor vessels Support Protocol 2: Making acid and base bottles Support Protocol 3: Preparing the effluent bottles Support Protocol 4: Making acid solution Support Protocol 5: Making base solution Basic Protocol 3: Preparing inoculum and inoculating bioreactors Alternate Protocol 1: Preparing inoculum less than 0.5% (w/v) of vessel volume Alternate Protocol 2: Preparing synthetic community aliquots and inoculation via the septum Alternate Protocol 3: Preparing inoculum from a tissue sample Basic Protocol 4: Sampling the bioreactor vessel Basic Protocol 5: Harvesting bioreactor vessel contents at end of experiment Support Protocol 6: Cleaning and sterilizing sampling needles Basic Protocol 6: Cleaning the bioreactor vessel Support Protocol 7: Cleaning bioreactor support bottles.

Gianetto-Hill CM ，Vancuren SJ ，Daisley B ，Renwick S ，Wilde J ，Schroeter K ，Daigneault MC ，Allen-Vercoe E ... -  《-》

Intestinal organoids: A new paradigm for engineering intestinal epithelium in vitro.

In recent years, the advent of intestinal organoid culture systems has revolutionized in vitro studies of the small intestine epithelium. Intestinal organoids are derived from self-organizing and self-renewing intestinal stem cells and closely recapitulate the native intestinal epithelium. They therefore represent a more physiologically-relevant in vitro model than conventional cell cultures for studying intestinal development, biology and pathophysiology. Moreover, they represent a promising and unprecedented new tool in the realm of regenerative and personalized medicine. In this review, we outline the current approaches to develop intestinal organoids and describe the strategies used to induce complexity, multicellularity and modularity in organoid culture systems; this knowledge will contribute to improved biomimicry of the organoid culture system. We focus on co-culture systems and explore the convergence of organoid technology and engineering principals. Finally, we describe applications of intestinal organoids in various fields.

Rahmani S ，Breyner NM ，Su HM ，Verdu EF ，Didar TF ... -  《-》