Surface enhanced transmission Raman spectroscopy: Quantitative performances for impurity analysis in complex matrices.

A transmission detection mode was investigated with SERS analyses (SETRS). A comparison between backscattering and transmission detection modes was conducted to demonstrate the feasibility of performing SETRS analyses. The impact of various parameters on the SERS signal intensity such as sample volume, lens collection optic, laser beam size and laser power were then examined. The analytical performances of SETRS were further evaluated through the quantification of an impurity (4-aminophenol) ranging from 3 to 20 µg/mL in a commercial pharmaceutical product using a total error risk-based approach. To account for expected variability of routine analysis, 9 batches of silver nanoparticles suspensions were used and experiments were performed over 5 different days and by 2 operators. Univariate spectral analysis based on a quadratic regression was compared to a multivariate approach using a partial least square regression. The presented results demonstrated that SETRS can be used to determine an impurity in a complex matrix opening new perspectives for quantitative applications.

Horne J ，Beckers P ，Sacré PY ，Francotte P ，Caudron E ，Hubert P ，Hubert C ，De Bleye C ，Ziemons E ... -  《-》

Development of a quantitative approach using surface-enhanced Raman chemical imaging: first step for the determination of an impurity in a pharmaceutical model.

This publication reports, for the first time, the development of a quantitative approach using surface-enhanced Raman chemical imaging (SER-CI). A pharmaceutical model presented as tablets based on paracetamol, which is the most sold drug around the world, was used to develop this approach. 4-Aminophenol is the main impurity of paracetamol and is actively researched in pharmaceutical formulations because of its toxicity. As its concentration is generally very low (<0.1%, w/w), conventional Raman chemical imaging cannot be used. In this context, a SER-CI method was developed to quantify 4-aminophenol assessing a limit of quantification below its limit of specification of 1000 ppm. Citrate-reduced silver nanoparticles were used as SERS substrate and these nanoparticles were functionalized using 1-butanethiol. Different ways to cover the tablets surface by butanethiol-functionalized silver nanoparticles were tested and a homogeneity study of the silver nanoparticles covering was realized. This homogeneity study was performed in order to choose the best way to cover the surface of tablets by silver colloid. Afterwards, the optimization of the SER-CI approach was necessary and different spectral intensity normalizations were tested. Finally, a quantitative approach using SER-CI was developed enabling to quantify 4-aminophenol from 0.025% to 0.2% in paracetamol tablets. This quantitative approach was tested on two different series of tablets using different batches of silver nanoparticles.

De Bleye C ，Sacré PY ，Dumont E ，Netchacovitch L ，Chavez PF ，Piel G ，Lebrun P ，Hubert P ，Ziemons E ... -  《-》

Determination of 4-aminophenol in a pharmaceutical formulation using surface enhanced Raman scattering: from development to method validation.

A surface enhanced Raman scattering (SERS) method able to quantify 4-aminophenol in a pharmaceutical formulation based on acetaminophen, also called paracetamol, was developed and, for the first time, successfully validated. In this context, silver nanoparticles were synthesized according to the method described by Lee-Meisel and used as SERS substrate. The repeatability of the silver colloid synthesis was tested using different methods to characterize the size and the zeta potential of silver nanoparticles freshly synthesized. To optimize the SERS samples preparation, a design of experiments implicating concentrations of citrate-reduced silver nanoparticles and aggregating agent was performed in order to maximize the Raman signal enhancement. Finally, an approach based on tolerance intervals and accuracy profiles was applied in order to thoroughly validate the method in a range of concentrations comprised from 3 to 15 µg mL(-1) using normalized band intensities. The standard addition method was selected as method calibration. Therefore, measurements were carried out on 4-aminophenol spiked solutions of the pharmaceutical formulation. Despite the well-known stability and reproducibility problems of SERS, the validation was performed using two operators and five batches of nanoparticles, one for each validation day.

De Bleye C ，Dumont E ，Rozet E ，Sacré PY ，Chavez PF ，Netchacovitch L ，Piel G ，Hubert P ，Ziemons E ... -  《-》

A mathematical approach to deal with nanoparticle polydispersity in surface enhanced Raman spectroscopy to quantify antineoplastic agents.

Antineoplastic agents are, for most of them, highly toxic drugs prepared at hospital following individualized prescription. To protect patients and healthcare workers, it is important to develop analytical tools able to identify and quantify such drugs on a wide concentration range. In this context, surface enhanced Raman spectroscopy (SERS) has been tested as a specific and sensitive technique. Despite the standardization of the nanoparticle synthesis, a polydispersity of nanoparticles in the suspension and a lack of reproducibility persist. This study focuses on the development of a new mathematical approach to deal with this nanoparticle polydispersity and its consequences on SERS signal variability through the feasibility of 5-fluorouracil (5FU) quantification using silver nanoparticles (AgNPs) and a handled Raman spectrophotometer. Variability has been maximized by synthetizing six different batches of AgNPs for an average size of 24.9 nm determined by transmission electron microscopy, with residual standard deviation of 17.0%. Regarding low performances of the standard multivariate data processing, an alternative approach based on the nearest neighbors were developed to quantify 5FU. By this approach, the predictive performance of the 5FU concentration was significantly improved. The mean absolute relative error (MARE) decreased from 16.8% with the traditional approach based on PLS regression to 6.30% with the nearest neighbors approach (p-value < 0.001). This study highlights the importance of developing mathematics adapted to SERS analysis which could be a step to overcome the spectral variability in SERS and thus participate in the development of this technique as an analytical tool in quality control to quantify molecules with good performances, particularly in the pharmaceutical field.

Dowek A ，Lê LMM ，Rohmer T ，Legrand FX ，Remita H ，Lampre I ，Tfayli A ，Lavielle M ，Caudron E ... -  《-》

Analysis of silver nanoparticles in antimicrobial products using surface-enhanced Raman spectroscopy (SERS).

Guo H ，Zhang Z ，Xing B ，Mukherjee A ，Musante C ，White JC ，He L ... -  《-》