Iontophoresis-coupled rapidly dissolving polymeric microneedle patch of naloxone for its enhanced transdermal delivery.

The transdermal delivery of naloxone for opioid overdose emergency purposes is a challenge due to its poor rate of diffusion through the layers of skin. This results in delayed delivery of an insufficient amount of the drug within minimal time as is desired to save lives. The ability of dissolving polymeric microneedles to shorten the lag time significantly has been explored and shown to have prospects in terms of the transdermal delivery of naloxone. This is an option that offers critical advantages to the ongoing opioid crisis, including ease of distribution and easy administration, with little to no need for intervention by clinicians. Nonetheless, this approach by itself needs augmentation to meet pharmacokinetic delivery attributes desired for a viable clinical alternative to existing market dosage forms. In this study, we report the success of an optimized iontophoresis-coupled naloxone loaded dissolving microneedle patch which had facilitated a 12- fold increase in average cumulative permeation and a 6-fold increase in drug flux over a conventional dissolving microneedle patch within 60 min of application (p < 0.05). This translates to a 30 % decrease in dose requirement in a mechanistically predicted microneedle patch established to be able to achieve the desired early plasma concentration time profile needed in an opioid overdose emergency. Applying a predictive mathematical model, we describe an iontophoresis-coupled microneedle patch design capable of meeting the desired pharmacokinetic profile for a viable naloxone delivery form through skin.

Tijani AO ，Connors D ，Schiavone C ，Peláez MJ ，Dogra P ，Puri A ... -  《-》

In vitro and in vivo transdermal iontophoretic delivery of naloxone, an opioid antagonist.

The feasibility of transdermal delivery of naloxone, an opioid antagonist, by anodal iontophoresis patches using Ag/AgCl electrodes was investigated. To examine the effect of current strength, species variation and drug concentration on skin permeability of naloxone, in vitro skin permeation studies were performed using rat dorsal skin and porcine ear skin as the membrane. To determine in vivo transdermal absorption rate of naloxone, the iontophoretic patch system was applied to the dorsal skin of conscious rat with a constant current supply for 24h. The in vitro steady-state skin permeation flux of naloxone current-proportionally (0-360 μA/cm(2)) increased without significant differences between these two different skin types. The in vitro delivery rate through the porcine skin was found to be independent of the concentration of naloxone hydrochloride dehydrate in the donor patch over the range from 1 to 10% (w/v). In the in vivo pharmacokinetic study, plasma concentrations of naloxone steadily increased and sustained steady-state levels from 4h to 24h after the initiation of current application. In vivo steady-state transdermal absorption rates at 90 and 180 μA/cm(2) were 136 and 305 μg/h/cm(2), respectively. These results suggest that the transdermal delivery rates of naloxone by anodal iontophoresis are sufficient for the management of intoxication in opioid-overdosed patients.

Yamamoto R ，Takasuga S ，Yoshida Y ，Mafune S ，Kominami K ，Sutoh C ，Kato Y ，Yamauchi M ，Ito M ，Kanamura K ，Kinoshita M ... -  《-》

Dissolving Microneedles Patch: A Promising Approach for Advancing Transdermal Delivery of Antischizophrenic Drug.

Microneedles (MNs) are minimally invasive transdermal drug delivery systems capable of penetrating the stratum corneum to overcome the barrier properties. The primary objective of this research was to prepare dissolving microneedle patches (DMNP) loaded with quetiapine (QTP). DMNP were fabricated employing the solvent casting technique, utilizing various polymer feed ratios including polyvinyl alcohol (PVA), polyvinylpyrrolidone K30 (PVP-K30), and polylactide-co-glycolide (PLGA) polymers. The loaded DMNP with QTP underwent a comprehensive characterization process encompassing assessments for compatibility, thickness, insertion potential, morphology, thermal behavior, X-ray diffraction, ex-vivo permeation, skin irritation, and histopathological changes. FTIR studies confirmed the compatibility of QTP with the microneedle patch composites. The thickness of the drug-loaded DMNP ranged from 0.67 mm to 0.97 mm. These microneedles exhibited an impressive penetration depth of 480 μm, with over 80% of the needles maintaining their original shape after piercing Parafilm-M. SEM analysis of the optimized DMNP-2 revealed the formation of sharp-tipped and uniformly surfaced needles, measuring 570 μm in length. Remarkably, the microneedles did not elicit any signs of irritation upon application of the prepared DMNP. The DMNP-2 showcased an impressive cumulative ex-vivo permeation of QTP, reaching 17.82 µg/cm2/hr. Additionally, histopathological assessment of vital organs in rabbits attested to the safety profile of the formulated microneedle patches. In conclusion, the developed microneedle patch represents a promising strategy for enhancing the transdermal delivery of QTP. This innovative approach has the potential to increase patient compliance, offering a more efficient and patient-friendly method of administering QTP.

Umar QU ，Khan MI ，Ahmad Z ，Akhtar MF ，Sohail MF ，Madni A ，Erum A ，Ayesha B ，Ain QU ，Mushtaq A ... -  《-》

Innovative freeze-drying technique in the fabrication of dissolving microneedle patch: Enhancing transdermal drug delivery efficiency.

Microneedle patch (MNP) has become a hot research topic in the field of transdermal drug delivery due to its ability to overcome the stratum corneum barrier. Among the various types of microneedles, dissolving microneedles represent one of the most promising transdermal delivery methods. However, the most used method for preparing dissolving microneedles, namely microfabrication, suffers from issues such as long drying time, susceptibility to humidity, and large batch-to-batch variability, which limit the development of dissolving microneedles. In this study, we report for the first time a method for preparing dissolving microneedles using freeze-drying technology. We screened substrates suitable for freeze-dried microneedle patch (FD-MNP) and used coating technology to enhance the mechanical strength of FD-MNP, allowing them to meet the requirements for skin penetration. We successfully prepared FD-MNP using hyaluronic acid as the substrate and insulin as the model drug. Scanning electron microscopy revealed that the microneedles had a porous structure. After coating, the mechanical strength of the microneedles was 0.61 N/Needle, and skin penetration rate was 97%, with a penetration depth of 215 μm. The tips of the FD-MNP dissolved completely within approximately 60 s after skin penetration, which is much faster than conventional MNP (180 s). In vitro transdermal experiments showed that the FD-MNP shortened the lag time for transdermal delivery of rhodamine 123 and insulin compared to conventional MNP, indicating a faster transdermal delivery rate. Pharmacological experiments showed that the FD-MNP lowered mouse blood glucose levels more effectively than conventional MNP, with a relative pharmacological availability of 96.59 ± 2.84%, higher than that of conventional MNP (84.34 ± 3.87%), P = 0.0095. After storage under 40℃ for two months, the insulin content within the FD-MNP remained high at 95.27 ± 4.46%, which was much higher than that of conventional MNP (58.73 ± 3.71%), P < 0.0001. In conclusion, freeze-drying technology is a highly valuable method for preparing dissolving microneedles with potential applications in transdermal drug delivery.

Su T ，Tang Z ，Hu J ，Zhu Y ，Shen T ... -  《-》

Development of Hydrogels for Microneedle-Assisted Transdermal Delivery of Naloxone for Opioid-Induced Pruritus.

Transdermal naloxone delivery could be a potential option for treating opioid-induced pruritus, but naloxone does not permeate skin well because of its hydrophilic nature. Microneedles (MNs) could overcome the skin barrier by painlessly creating microchannels in the skin to permit naloxone absorption to therapeutic levels. This study investigated how ionization correlates with naloxone permeation across MN-treated skin. Hydrogels containing 0.2, 0.5, or 1% naloxone were formulated with 1% cross-linked polyacrylic acid (polymer) and adjusted to pH 5, 6.5, or 7.4. Porcine skin was treated with MNs and naloxone gel, and in vitro permeation studies were performed using an in-line diffusion setup. Gel structural properties were evaluated using rheology. All gels had viscoelastic properties and good spreadability. Naloxone permeation through intact skin was highest from pH 7.4 gels when naloxone is unionized, in contrast with undetectable concentrations permeated from pH 5 gels with 100% ionization. Combining MN treatment with pH 5 gels significantly enhanced permeation and resulted in steady-state flux that would achieve therapeutic delivery. Absorption lag time was affected by MN length and naloxone gel concentration. Polymer concentration did not influence drug permeability. This study demonstrates that transdermal naloxone delivery with MNs is a viable treatment option for opioid-induced pruritus.

Gao X ，Brogden NK 《-》