Feasibility and reproducibility of new technique for measurement of transverse diameter of levator ani muscle hiatus using two-dimensional transperineal ultrasound in nulliparous women with term pregnancy.

The aim of the present study was two-fold. Firstly, we aimed to develop and describe a technique for measurement of the transverse diameter (TD) of the levator ani muscle (LAM) hiatus in the coronal view using two-dimensional (2D) transperineal ultrasound (TPUS) in nulliparous women with a term pregnancy. Secondly, we aimed to evaluate the feasibility and reproducibility of 2D-TPUS assessment of LAM hiatal TD and assess intermethod agreement between 2D-TPUS and three-dimensional (3D) TPUS measurement of TD in the axial plane, which is considered the gold standard in nulliparous women with term pregnancy. We recruited a group of nulliparous women with term pregnancy before the onset of labor. The study was conducted in two phases: Phase 1 involved developing and describing the 2D-TPUS technique for measuring LAM hiatal TD, and Phase 2 focused on assessing the technique's feasibility, reproducibility and intermethod agreement with 3D-TPUS measurement of LAM hiatal TD. In Phase 1, we enrolled 30 women. Each woman underwent acquisition of a 3D-TPUS volume, which was analyzed using multiplanar mode to identify and determine the appearance of the lateral borders of the LAM in the coronal plane, at the level of the plane of minimal hiatal dimensions. These borders were used as landmarks for TD measurement. Additionally, we measured the distance between the plane used for TD measurement and the center of the urethra in the axial view. In Phase 2, we recruited 100 women. Each woman underwent acquisition of three 2D-TPUS videoclips in the coronal plane, each encompassing a sweep of the entire LAM hiatus, and a 3D volume, all obtained during rest. On the 2D videoclips, TD was measured twice by one operator and once by another operator. In the 3D volume, TD was measured once, by one operator, in the axial plane; this measurement was considered the gold standard. Each operator was blinded to all other measurements during their assessments. We analyzed intraobserver and interobserver reproducibility and performed an intermethod (2D vs 3D) comparison. Bland-Altman analysis was conducted, and Levene's W0 test and Student's t-test were performed to explore clinical factors that might contribute to systematic differences. In Phase 1, we identified successfully the landmarks denoting the lateral borders of the LAM hiatal TD in the coronal view. These appeared as two symmetrical hypoechogenic indentations located at the inner border of the hyperechogenic structure of the LAM, at the point of maximum distance between the two sides of the LAM. The distance between the urethra and the plane where TD should be measured using 3D-TPUS in the axial plane had a median of 4 mm and varied from 0 to 9 mm. This enabled us to describe a method for assessing LAM hiatal TD in the coronal plane using 2D-TPUS. In Phase 2, LAM hiatal TD was measured successfully in all 2D and 3D acquisitions from the entire group of 100 women. The analyses for intraobserver and interobserver reproducibility and the intermethod comparison (2D vs 3D) revealed almost perfect agreement in TD measurements using 2D-TPUS, with intraclass correlation coefficients of 0.95 (95% CI, 0.92-0.96), 0.87 (95% CI, 0.78-0.92) and 0.85 (95% CI, 0.78-0.90), respectively. The average differences between measurements were 0.1 mm for intraobserver, 1.0 mm for interobserver and 0.2 mm for intermethod repeatability. No systematic differences were observed in any of the measurement sets, except in the interobserver analysis, although this difference was clinically not significant (38.2 vs 37.2 mm, P = 0.01). None of the examined clinical factors (maternal body mass index and maternal age) exhibited a statistically significant impact on intraobserver, interobserver or intermethod reliability. Utilizing our technique, described herein, to measure the LAM hiatal TD in the coronal view using 2D-TPUS is not only feasible but also highly reproducible and accurate in nulliparous women with term pregnancy. Moreover, it yields measurements that are comparable to those obtained in the reconstructed axial plane generated by 3D-TPUS. © 2024 International Society of Ultrasound in Obstetrics and Gynecology.

Youssef A ，Del Magno A ，Nedu B ，Dapoto F ，Brunelli E ... -  《-》

Is curved three-dimensional ultrasound reconstruction needed to assess the warped pelvic floor plane?

Caudal distension of the female pelvic floor is common and results in perineal descent and a caudally curved levator hiatus (warping). Image reconstruction of the pelvic floor using currently available ultrasound techniques involves a linear approach (flat-plane reconstruction). We aimed to evaluate the feasibility, reproducibility and potential usefulness of a new three-dimensional (3D) technique capable of reconstructing a curved plane of the levator hiatus. Primiparous women were recruited to undergo a 3D/four-dimensional transperineal ultrasound examination 3-6 months after delivery. Levator ani muscle warping was evaluated on Valsalva maneuver by measuring the distance between the plane extending from the pubic rami to the anorectal angle and the plane of minimal hiatal dimensions on the coronal plane. Warping distance was used to reconstruct a curved plane of the levator hiatus using the curved OmniView volume contrast imaging (VCI) technique (C-OV). Intra- and interobserver reproducibility of the C-OV technique were assessed, as was intermethod agreement between the C-OV technique and the linear OmniView-VCI (L-OV) technique, for the measurement of levator hiatal area on Valsalva maneuver. Measurement of the levator hiatal area using C-OV was feasible in all 84 women recruited. The warping distance ranged from -3.5 to 9.7 mm, confirming that the 1-2-cm slice thickness traditionally used for linear reconstruction was adequate for proper assessment of levator hiatal area in our population. C-OV showed excellent intra- and interobserver reproducibility, as well as excellent agreement with the L-OV technique for measuring levator hiatal area. No systematic difference was demonstrated in any of the reproducibility studies performed. 3D reconstruction of the warped levator hiatal plane is feasible and highly reproducible. In our population, reconstruction of a curved plane to correct for levator hiatal warping did not offer any benefit over the traditionally performed linear reconstruction. Copyright © 2016 ISUOG. Published by John Wiley & Sons Ltd.

Youssef A ，Cavalera M ，Pacella G ，Salsi G ，Morganelli G ，Montaguti E ，Cataneo I ，Pilu G ，Rizzo N ... -  《-》

Reliability of new three-dimensional ultrasound technique for pelvic hiatal area measurement.

To assess the reproducibility of a new technique for three-/four-dimensional (3D/4D) ultrasound imaging of the pelvic floor: OmniView™ volume contrast imaging (VCI) for measurement of the pelvic hiatal area on maximum contraction and Valsalva maneuver. In addition, we aimed to study the intermethod agreement between the new technique and the 3D/4D render method. We acquired one static 3D and two dynamic 4D transperineal volumes (one obtained during contraction and one during Valsalva maneuver) from 35 nulliparous asymptomatic healthy volunteers and 35 women with symptoms of pelvic floor dysfunction. Each 3D dataset was analyzed using the OmniView-VCI technique to measure the pelvic hiatal area at rest, on maximum contraction and on maximum Valsalva. Analysis was performed twice by the same operator and once by another operator in order to assess intra- and interobserver reproducibility. All measurements were repeated by one operator using the 3D/4D render method to evaluate the intermethod agreement. Reproducibility and intermethod agreement were studied by means of intraclass correlation coefficients (ICC) and the Bland-Altman method. Measurement of hiatal area using the OmniView-VCI technique showed excellent intraobserver and interobserver reproducibility in both asymptomatic and symptomatic women at rest, on contraction and on Valsalva maneuver. In addition, excellent agreement was demonstrated between OmniView-VCI and 3D/4D render in both groups (ICCs on Valsalva in asymptomatic and symptomatic women were 0.894 and 0.975, respectively). No systematic difference was noted in any of the reliability studies performed. OmniView-VCI is a reliable method for pelvic hiatal area measurement. Both rendering mode and OmniView-VCI can be used interchangeably for assessing pelvic hiatal area. Copyright © 2015 ISUOG. Published by John Wiley & Sons Ltd.

Youssef A ，Montaguti E ，Sanlorenzo O ，Cariello L ，Salsi G ，Morganelli G ，Azzarone C ，Pilu G ，Rizzo N ... -  《-》

Intra- and interobserver reliability of levator ani muscle biometry and avulsion using three-dimensional endovaginal ultrasonography.

To test intra- and interobserver reliability of assessment of levator ani muscle (LAM) biometry and avulsion using antenatal and postnatal three-dimensional (3D) endovaginal ultrasonography (EVUS), and to determine levator-urethra gap (LUG) values on EVUS. Primigravid women were scanned prior to delivery, early postpartum and 3 months postpartum, with EVUS performed at rest using a standardized protocol. During post-processing, measurements were taken in the plane of minimal hiatal dimensions by two independent investigators blinded to the clinical information and each other's results. LAM attachment to the pubic bone was assessed at the pubococcygeus and puborectalis levels using a score system: (1) intact; (2) partial avulsion (< 50%); (3) partial avulsion (≥ 50%); and (4) complete avulsion. Intraclass correlation coefficients (ICCs) and limits of agreement (LOAs) were calculated for each time point, with intraobserver analysis conducted in a random sample of 20 women scanned 3 months following delivery. One hundred and sixty-nine antenatal scans, 83 early postpartum scans and 75 scans at 3 months postpartum were performed. The intra- and interobserver ICCs, respectively, were 0.95 and 0.86-0.88 for hiatal area, 0.90 and 0.16-0.74 for hiatal transverse diameter, 0.91 and 0.73-0.80 for hiatal anteroposterior diameter, 0.50 and 0.32-0.52 for LAM thickness at the '9 o'clock position' and 0.55 and 0.33-0.45 for LAM thickness at the '3 o'clock position'. Both intra- and interobserver analysis revealed acceptable LOAs for hiatal measurements, but the LOAs were wide for thickness measurements. The correlation of LAM avulsion score was excellent on intra- and interobserver analysis. Antenatal mean ± SD LUGs were 18.8 ± 2.4 mm and 19.2 ± 2.3 mm on right and left sides, respectively; the intraobserver ICC was 0.82-0.91 but LOAs were wide, while interobserver ICC was 0.13-0.68 and also had wide LOAs. 3D-EVUS is a reliable tool for the assessment of hiatal measurements and LAM avulsion in women during pregnancy and after delivery, but performs less well for measurements of LAM thickness and LUG. EVUS can therefore be used in research studies involving childbirth and recurrent prolapse.

van Delft K ，Shobeiri SA ，Thakar R ，Schwertner-Tiepelmann N ，Sultan AH ... -  《-》

Breech progression angle: new feasible and reliable transperineal ultrasound parameter for assessment of fetal breech descent in birth canal.

To assess the feasibility and reliability of transperineal ultrasound in the assessment of fetal breech descent in the birth canal, by measuring the breech progression angle (BPA). Women with a singleton pregnancy with the fetus in breech presentation between 34 and 41 weeks' gestation were recruited. Transperineal ultrasound images were acquired in the midsagittal view for each woman, twice by one operator and once by another. Each operator measured the BPA after anonymization of the transperineal ultrasound images. BPA was defined as the angle between a line running along the long axis of the pubic symphysis and another line extending from the most inferior portion of the pubic symphysis tangentially to the lowest recognizable fetal part in the maternal pelvis. Each operator was blinded to all other measurements performed for each woman. Intra- and interobserver reproducibility of BPA measurement was evaluated using the intraclass correlation coefficient (ICC). To investigate the presence of any bias, intra- and interobserver agreement was also analyzed using Bland-Altman analysis. Student's t-test and Levene's W0 test were used to investigate whether a number of different clinical factors had an effect on systematic differences and homogeneity, respectively, between BPA measurements. Overall, 44 women were included in the analysis. BPA was measured successfully by both operators on all images. Both intra- and interobserver agreement analyses showed excellent reproducibility in BPA measurement, with ICCs of 0.88 (95% CI, 0.80-0.93) and 0.83 (95% CI, 0.71-0.90), respectively. The mean difference between measurements was 0.4° (95% CI, -1.4 to 2.2°) for intraobserver repeatability and -0.4° (95% CI, -2.6 to 1.8°) for interobserver repeatability. The upper limits of agreement were 12.0° (95% CI, 8.9-15.1°) and 13.6° (95% CI, 9.9-17.3°) for intra- and interobserver repeatability, respectively. The lower limits of agreement were -11.2° (95% CI, -14.3 to -8.1°) and -14.4° (95% CI, -18.2 to -10.7°) for intra- and interobserver repeatability, respectively. No systematic difference between BPA measurements was found on either intra- or interobserver agreement analysis. None of the clinical factors examined (maternal body mass index, maternal age, gestational age at the ultrasound scan and parity) showed a statistically significant effect on intra- or interobserver reliability. BPA represents a new feasible and highly reproducible measurement for the evaluation of fetal breech descent in the birth canal. Future studies assessing its usefulness in the prediction of successful external cephalic version and breech vaginal delivery are needed. © 2021 International Society of Ultrasound in Obstetrics and Gynecology.

Youssef A ，Brunelli E ，Fiorentini M ，Lenzi J ，Pilu G ，El-Balat A ... -  《-》