Catalytic Chemistry Derived Artificial Solid Electrolyte Interphase for Stable Lithium Metal Anodes Working at 20 mA cm(-2) and 20 mAh cm(-2).

A stable solid electrolyte interphase (SEI) layer is crucial for lithium metal anode (LMA) to survive in long-term cycling. However, chaotic structures and chemical inhomogeneity of natural SEI make LMA suffering from exasperating dendrite growth and severe electrode pulverization, which hinder the practical application of LMAs. Here, we design a catalyst-derived artificial SEI layer with an ordered polyamide-lithium hydroxide (PA-LiOH) bi-phase structure to modulate ion transport and enable dendrite-free Li deposition. The PA-LiOH layer can substantially suppress the volume changes of LMA during Li plating/stripping cycles, as well as alleviate the parasitic reactions between LMA and electrolyte. The optimized LMAs demonstrate excellent stability in Li plating/stripping cycles for over 1000 hours at an ultra-high current density of 20 mA cm-2 in Li||Li symmetric cells. A high coulombic efficiency up to 99.2 % in Li half cells in additive-free electrolytes is achieved even after 500 cycles at a current density of 1 mA cm-2 with a capacity of 1 mAh cm-2 .

Cheng Y ，Wang Z ，Chen J ，Chen Y ，Ke X ，Wu D ，Zhang Q ，Zhu Y ，Yang X ，Gu M ，Guo Z ，Shi Z ... -  《-》

Li Alginate-Based Artificial SEI Layer for Stable Lithium Metal Anodes.

Zhong Y ，Chen Y ，Cheng Y ，Fan Q ，Zhao H ，Shao H ，Lai Y ，Shi Z ，Ke X ，Guo Z ... -  《-》

Bi-containing Electrolyte Enables Robust and Li Ion Conductive Solid Electrolyte Interphase for Advanced Lithium Metal Anodes.

The notorious lithium dendrite growth, causing the safety concern, hinders the practical application of high-capacity Li metal anodes for rechargeable batteries. Here, a robust and highly ionic conductive solid electrolyte interphase (SEI) layer to protect Li metal anode is in-situ constructed by introducing trace additive of tetrapotassium heptaiodobismuthate (K4BiI7) into electrolyte. The K4BiI7-added electrolyte enables Li metal anode to display a stable cycling for over 600 cycles at 1.0 mA cm-2/1.0 mAh cm-2 and over 400 cycles at 5.0 mA cm-2/5.0 mAh cm-2. In situ optical microscopy observations also conform the suppression of Li dendrites at high current density. Moreover, the in-situ SEI layer modified Li anode exhibits an average Coulombic efficiency of 99.57% and less Li dendrite growth. The Li-S full sells with the modified electrolyte also show improved electrochemical performance. This research provides a cost-efficient method to achieve a highly ionic conductive and stable SEI layer toward advanced Li metal anodes.

Cui Y ，Liu S ，Liu B ，Wang D ，Zhong Y ，Zhang X ，Wang X ，Xia X ，Gu C ，Tu J ... -  《Frontiers in Chemistry》

In Situ Formed Gradient Composite Solid Electrolyte Interphase Layer for Stable Lithium Metal Anodes.

Lithium (Li) metal anode (LMA) is highly considered as a desirable anode material for next-generation rechargeable batteries because of its high specific capacity and the lowest reduction potential. However, uncontrollable growth of Li dendrites, large volume change, and unstable interfaces between LMA and electrolyte hinder its practical application. Herein, a novel in situ formed artificial gradient composite solid electrolyte interphase (GCSEI) layer for highly stable LMAs is proposed. The inner rigid inorganics (Li2 S and LiF) with high Li+ ion affinity and high electron tunneling barrier are beneficial to achieve homogeneous Li plating, while the flexible polymers (poly(ethylene oxide) and poly(vinylidene fluoride)) on the surface of GCSEI layer can accommodate the volume change. Furthermore, the GCSEI layer demonstrates fast Li+ ion transport capability and increased Li+ ion diffusion kinetics. Accordingly, the modified LMA enables excellent cycling stability (over 1000 h at 3 mA cm-2 ) in the symmetric cell using carbonate electrolyte, and the corresponding Li-GCSEI||LiNi0.8 Co0.1 Mn0.1 O2 full cell demonstrates 83.4% capacity retention after 500 cycles. This work offers a new strategy for the design of dendrite-free LMAs for practical applications.

Zhang CH ，Jin T ，Liu J ，Ma J ，Li NW ，Yu L ... -  《-》

Borate-Based Artificial Solid-Electrolyte Interphase Enabling Stable Lithium Metal Anodes.

Li M ，Yang X ，Wu D ，Zhang Q ，Wei X ，Cheng Y ，Gu MD ... -  《-》