Hydrothermal synthesis of water-soluble Mn- and Cu-doped CdSe quantum dots with multi-shell structures and their photoluminescence properties.

Optical properties of semiconductor quantum dots (QDs) can be tuned by doping with transition metal ions. In this study, water-soluble CdSe/ZnS:Mn/ZnS QDs with the core/shell/shell structure were synthesized through a hydrothermal method, in which the surface of the CdSe core was coated with a ZnS:Mn shell and ZnS capping shell. Herein, the CdSe core QDs were prepared first and then doped with Mn2+; therefore, the QD size and doping level could be controlled independently and interference from the self-purifying effect could be avoided. When CdSe cores with diameters less than 1.9 nm were used, Mn-related photoluminescence (PL) was observed as the main PL band, whereas the band-edge PL was mainly observed when larger CdSe cores were used. Furthermore, using ZnS:Cu as the doping shell layer, CdSe/ZnS:Cu/ZnS and ZnSe/ZnS:Cu/ZnS nanoparticles were successfully synthesized, and Cu-related PL was clearly observed. These results indicate that the core/shell/shell QD structure with doping in the shell layer is a versatile method for synthesizing doped QDs.

Nishimura H ，Enomoto K ，Pu YJ ，Kim D ... -  《RSC Advances》

II-VI core/shell quantum dots and doping with transition metal ions as a means of tuning the magnetoelectronic properties of CdS/ZnS core/shell QDs: A DFT study.

This paper examines the alterations in the properties of II-VI Quantum Dots (QDs) when these are coated with a shell made of another material of the same family and investigates the structural, electronic and magnetic properties of doped CdS/ZnS core/shell QDs. The core/shell QDs have been constructed by building the shell over the bare core QD and it is found that this construction of a shell over the bare QD can bring about dramatic changes in its optical properties. On changing the shell by varying either the cation or the anion, substantial variations are brought about in the band gap and electrophilicity. The trend of Fermi energies is more negative for core/shell QDs than for the QDs without a shell, and the value is almost the same for core/shell QDs with the same core. Swapping of the core and the shell materials brings greater stability in the case of shells of the wider band gap materials. Binding energy data demonstrates that the CdS/ZnS, CdSe/ZnSe, CdSe/CdS core/shell systems are more stable than ZnS/CdS, ZnSe/CdSe, CdS/CdSe core/shell systems, respectively. An augmentation in the properties is found on doping the QD with transition metal ions. The binding energies are found to be functions of the kind of dopant as well as the spin multiplicity and account for the stability of one spin state over the other at a specific site of the QD. The most fascinating property that plays a decisive role in the extant work is the introduction of magnetism in core/shell QDs as a result of the entry of unpaired electrons within the CdS/ZnS QDs on doping with transition metal ions. The deviation of the observed magnetic moments from the expected values increases as the dopant is varied from Mn2+ to Fe2+ to Co2+ to Ni2+ to Cu2+. Hirshfeld charge analysis shows that the doped ion accepts negative charge from the sulfide ions in the core, with the smallest charge transfer seen in the case of Hg2+ ions. As we move from Mn2+ to Hg2+, the trend followed for the Hirshfeld charges indicates that the overall charge on the core is lower and that on the shell is higher for all the doped cases in comparison to the undoped CdS/ZnS core/shell QD. The band gap values reveal that the Fe2+ doped CdS/ZnS core/shell structures have the smallest band gaps. Hence, we expect that this paper will help researchers to develop a strategy to produce QDs of the anticipated properties for various applications, and transition metal ions can be successfully employed for modification of various magnetoelectronic properties of the host semiconductor for future applications in nanotechnology.

Malik P ，Thareja R ，Singh J ，Kakkar R ... -  《-》

Synthesis of far-red- and near-infrared-emitting Cu-doped InP/ZnS (core/shell) quantum dots with controlled doping steps and their surface functionalization for bioconjugation.

Lim M ，Lee W ，Bang G ，Lee WJ ，Park Y ，Kwon Y ，Jung Y ，Kim S ，Bang J ... -  《-》

Bandgap- and Radial-Position-Dependent Mn-Doped Zn-Cu-In-S/ZnS Core/Shell Nanocrystals.

This paper presents a mechanistic study on the doping of Zn-Cu-In-S/ZnS core/shell quantum dots (QDs) with Mn by changing the Zn-Cu-In-S QD bandgap and dopant position inside the samples (Zn-Cu-In-S core and ZnS shell). Results show that for the Mn:Zn-Cu-In-S/ZnS system, a Mn-doped emission can be obtained when the bandgap value of the QDs is larger than the energy of Mn-doped emission. Conversely, a bandgap emission is only observed for the doped system when the bandgap value of QDs is smaller than the energy gap of the Mn-doped emission. In the Zn-Cu-In-S/Mn:ZnS systems, doped QDs show dual emissions, consisting of bandgap and Mn dopant emissions, instead of one emission band when the value of the host bandgap is larger than the energy of the Mn-doped emission. These findings indicate that the emission from Mn-doped Zn-Cu-In-S/ZnS core/shell QDs depends on the bandgap of the QDs and the dopant position inside the core/shell material. The critical bandgap of the host materials is estimated to have the same value as the energy of the Mn d-d transition. Subsequently, the mechanism of photoluminescence properties of the Mn:Zn-Cu-In-S/ZnS and Zn-Cu-In-S/Mn:ZnS core/shell QD systems is proposed. Control experiments are then carried out by preparing Mn-doped Zn(Cu)-In-S QDs with various bandgaps, and the results confirm the reliability of the suggested mechanism. Therefore, the proposed mechanism can aid the design and synthesis of novel host materials in fabricating doped QDs.

Peng L ，Huang K ，Zhang Z ，Zhang Y ，Shi Z ，Xie R ，Yang W ... -  《-》

Synthesis of near-infrared-emitting CdTe/CdSe/ZnSe/ZnS heterostructure.

Yang P 《JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY》