Early clinical and radiographic outcomes of anatomic total shoulder arthroplasty with a biconvex posterior augmented glenoid for patients with posterior glenoid erosion: minimum 2-year follow-up.

Glenoid bone loss in anatomic total shoulder arthroplasty (aTSA) remains a controversial and challenging clinical problem. Previous studies have shown high rates of glenoid loosening for aTSA in shoulders with retroversion, posterior bone loss, and posterior humeral head subluxation. This study is the first to present minimum 2-year follow-up data of an all-polyethylene, biconvex augmented anatomic glenoid component for correction of glenoid retroversion and posterior humeral head subluxation. This study is a multicenter, retrospective review of prospectively collected data on consecutive patients from 7 global clinical sites. All patients underwent aTSA using the biconvex posterior augmented glenoid (PAG). Inclusion criteria were preoperative computed tomographic (CT) scan, minimum 2 years since surgery, preoperative and minimum 2-year postoperative range of motion examination, and patient-reported outcome measures (PROMs). Glenoid classification, glenoid retroversion, and posterior humeral head subluxation were measured from preoperative CT and radiography and postoperative radiography. Statistical comparisons between pre- and postoperative values were performed with a paired t test. Eighty-six of 110 consecutive patients during the study period (78% follow-up) met the inclusion criteria and were included in our analysis. Mean follow-up was 35 ± 10 months, with a mean age of 68 ± 8 years (range 48-85). Range of motion statistically improved in all planes from pre- to postoperation. Mean visual analog scale score improved from 5.2 preoperation to 0.7 postoperation, Single Assessment Numeric Evaluation score from 43.2 to 89.5, Constant score from 41.8 to 76.9, and American Shoulder and Elbow Surgeons Standardized Shoulder Assessment Form score from 49.8 to 86.7 (all P < .0001). Mean glenoid retroversion improved from 19.3° to 7.4° (P < .0001). Posterior subluxation improved from 69.1% to 53.5% and posterior decentering improved from 5.8% to -3.0% (P < .0001). There was 1 patient with both a prosthetic joint infection and radiographic glenoid loosening that required revision. Seventy-nine of 86 patients had a Lazarus score of 0 (no radiolucency seen about peg or keel) at final follow-up. This study shows that at minimum 2-year follow-up, a posterior-augmented all-polyethylene glenoid can correct glenoid retroversion and posterior humeral head subluxation. Clinically, there was significant improvement in both range of motion and PROMs.

Garrigues GE ，Quigley RJ ，Johnston PS ，Spencer E ，Walch G ，Neyton L ，Kelly J ，Schrumpf M ，Gillespie R ，Sears BW ，Hatzidakis AM ，Lau B ，PerFORM Investigators ... -  《-》

Total shoulder arthroplasty in patients with a B2 glenoid addressed with corrective reaming: mean 8-year follow-up.

The management of Walch B2 glenoid deformities in primary glenohumeral osteoarthritis is frequently debated. Previous literature has shown that the treatment of B2 glenoids with high-side reaming and anatomic total shoulder arthroplasty (aTSA) perform well in the short-term but is associated with an increased glenoid component failure rate in severe deformities. Therefore, many have explored alternative options, including augmented anatomic glenoid components and reverse shoulder arthroplasty. Our goal in this study is to provide mid-term radiographic and clinical outcomes after high-side reaming and aTSA for B2 glenoids. Patients were followed both clinically and radiographically. Preoperative computed tomography scans were used for retrospective analysis of deformity. Both preoperative and postoperative visual analog scale pain, American Shoulder and Elbow Surgeons score, and Simple Shoulder Test scores were collected. Radiographs were analyzed preoperatively and postoperatively for humeral head decentering relative to the glenoid vault, immediate glenoid seating, and final glenoid peg radiolucency. Of the original cohort of 59 patients (6 now deceased) reported at a mean radiographic follow-up of 3.4 years, 34 shoulders in 33 patients with B2 glenoids (mean retroversion 18.9°, range 4°-32°) were available for follow-up at a mean of 8.6 years (range 5.5-11.2) after high-side glenoid reaming with aTSA. Three (5.1%) of the original 59 shoulder were revised. At final follow-up, 3 of 30 (10.0%) shoulders had radiographic glenoid component failure, but were unrevised. Glenoid component failure was associated with worse initial glenoid component seating (mean Lazarus score 1.2 vs. 2.0, P = .002). Glenoid failure was also associated with increased posterior humeral head subluxation at 2-4 year follow-up (mean 5.6% vs. 12.6%, P = .045) and at final follow-up (mean 7.0% vs. 21%, P = .002). There was no association between glenoid component failure and preoperative retroversion, inclination, or humeral head subluxation (all P > .05). Glenoid component failure was associated with worse American Shoulder and Elbow Surgeons (88 vs. 73) and visual analog scale pain (0.8 vs. 2.1) scores (both P = .03). At a mean of 8.6 years, 88% of shoulders available for follow-up had well-fixed glenoid components. Glenoid component failure was associated with poor initial glenoid component seating, with failed components having an average of 25% of the glenoid component not seated. Preoperative deformity such as glenoid retroversion, inclination, or humeral head subluxation did not predict glenoid component failure. This study supports that initial glenoid component seating and recurrence of posterior humeral head subluxation may be the most important factors for mid-term glenoid component survival in aTSA in patients with B2 glenoids.

Harold RE ，Sweeney PT ，Torchia MT ，Chamberlain AM ，Keener JD ... -  《-》

Anatomic total shoulder arthroplasty for B2 glenoids treated with asymmetric reaming has equivalent survivorship and patient outcomes compared with type A glenoids at a mean 9-year follow-up.

Walch B2 glenoids can present a challenge to shoulder arthroplasty surgeons. Short-term studies have demonstrated that corrective reaming to 10° of retroversion in anatomic total shoulder arthroplasty (aTSA) can result in good outcomes; however, there is little data reporting the long-term outcomes in this cohort. B2 glenoids treated with high-side reaming present a theoretical risk of early glenoid component failure as one may ream into the subchondral bone. This study aimed to demonstrate that (1) B2 glenoids treated with corrective reaming have durable results and (2) offer similar results to Walch A1/2 in long-term follow-up. Patients who underwent aTSA by a single surgeon (E.L.F.) were identified from a shoulder arthroplasty registry. Inclusion criteria included Walch A1, A2, or B2 glenoid; a diagnosis of primary shoulder osteoarthritis; and a minimum radiographic and clinical follow-up of 5 years. Forty-three patients with B2 glenoids were compared to a cohort of 42 patients with A1 or A2 glenoids. Preoperative computed tomography (CT) and radiographs were used to assess deformity, glenoid version, and posterior subluxation of the humeral head. Postoperatively, patients were assessed with radiographs and patient-reported outcome measures including American Shoulder and Elbow Surgeons Standardized Shoulder Assessment Form (ASES) score, Simple Shoulder Test (SST) score, and visual analog scale (VAS). Eighty-five shoulders (82 patients, 42 B2 and 43 A1/A2 glenoids) with an average follow-up of 9.4 years were included. In the B2 cohort, the average retroversion was 21.1° and posterior subluxation was 69.4% compared with 10.6° (P < .001) and 57.5% (P < .001), respectively, in the A1 or A2 cohort. The cohort demographics were similar except for male sex (B2 69.8% vs. A1 or A2 37.2%, P = .008). There was no difference between the cohorts in their improvement in ASES (P = .807), SST (P = .586), and VAS (P = .930) scores. There was no difference in lateral humeral offset (P = .889) or acromial humeral interval (P = .468) between initial postoperative and final follow-up visits. Survivorship for B2 glenoids was 97.6%, 94.1%, and 73.3% at 5, 10, and 15 years, respectively, compared with 97.6%, 91.9%, and 83.5% in type A glenoids. The revision rate was similar between the 2 groups (P = .432). Lazarus score (P = .682) and rates of humeral radiolucency (P = .366) and humeral osteolysis (P = .194) were similar between the 2 cohorts at final follow-up. Asymmetric reaming of patients with B2 glenoids is a reliable method of glenoid preparation with excellent mid- to long-term clinical results, patient-reported outcomes, and low revision rates similar to their A1 and A2 counterparts.

Cirino CM ，Kantrowitz DE ，Boucher T ，Patel A ，Duey AH ，Cagle PJ ，Flatow EL ... -  《-》

Factors associated with functional improvement after posteriorly augmented total shoulder arthroplasty.

Posteriorly augmented glenoid components in anatomic total shoulder arthroplasty (TSA) address posterior glenoid bone loss with inconsistent results. The purpose of this study was to identify preoperative and postoperative factors that impact range of motion (ROM) and function after augmented TSA in patients with type B2 or B3 glenoid morphology. This was a retrospective review of all patients who underwent TSA with a step-type augmentation performed by a single surgeon between 2009 and 2018. Patients with Walch type B2 or B3 glenoids were included. Outcomes included forward elevation (FE), external rotation (ER), internal rotation (IR), Single Assessment Numeric Evaluation (SANE) score, and visual analog scale pain score. Preoperative imaging was reviewed to assess glenoid retroversion and posterior humeral head subluxation relative to the scapular body and midglenoid face. Postoperative measurements included glenoid retroversion, subluxation relative to the scapular body, subluxation relative to the central glenoid peg, and center-peg osteolysis. Measurements were performed by investigators blinded to ROM and functional outcome scores. Fifty patients (mean age, 68.1 ± 8.0 years) with a mean follow-up period of 42.0 months (range, 24-106 months) were included. Glenoid morphology included type B2 glenoids in 41 patients and type B3 glenoids in 9. One patient had center-peg osteolysis, and 1 patient had glenoid component loosening. Average preoperative FE, ER, and IR were 110°, 21°, and S1, respectively. Average postoperative FE, ER, and IR were 155°, 42°, and L1, respectively. The mean postoperative visual analog scale score was 0.5 ± 0.8, and the mean SANE score was 94.5 ± 5.6. Type B3 glenoids were associated with better postoperative IR compared with type B2 glenoids (T10 vs. L1, P = .024), with no other differences in ROM between the glenoid types. Preoperative glenoid retroversion did not significantly impact postoperative ROM. Postoperative glenoid component retroversion and residual posterior subluxation relative to the scapular body or glenoid face did not correlate with ROM in any plane. However, posterior subluxation relative to the glenoid face was moderately associated with lower SANE scores (r = -0.448, P = .006). Patients achieved excellent functional outcomes and pain improvement after TSA with an augmented glenoid component. Postoperative ROM and function showed no clinically important associations with preoperative or postoperative glenoid retroversion or humeral head subluxation in our cohort of posteriorly augmented TSAs, except for worse functional scores with increased humeral head subluxation in relation to the glenoid surface.

Gutman MJ ，Kohan EM ，Hendy BA ，Joyce CD ，Kirsch JM ，Singh A ，Sherman M ，Austin LS ，Namdari S ，Williams GR Jr ... -  《-》

Preliminary Results of a Posterior Augmented Glenoid Compared to an all Polyethylene Standard Glenoid in Anatomic Total Shoulder Arthroplasty.

Wright TW ，Grey SG ，Roche CP ，Wright L ，Flurin PH ，Zuckerman JD ... -  《-》