Countercurrent Salting-out Homogenous Liquid-Liquid Extraction and Dispersive Liquid-Liquid Microextraction Based on the Solidification of Floating Organic Drop Followed by High-Performance Liquid Chromatography for the Isolation and Preconcentration of P

Pesticides are widely used to control pests and prevent diseases in crops, including cereals, vegetables, and fruits. Due to factors such as the persistence of pesticides, bioaccumulation, and potential toxicity, pesticide residue monitoring in foodstuffs is very important. In the current research, we proposed a novel approach using countercurrent salting-out homogenous liquid-liquid extraction combined with dispersive liquid-liquid microextraction based on the solidification of floating organic droplets (DLLME-SFO) for isolation and preconcentration of pesticides from aqueous samples for analysis by high-performance liquid chromatography-ultraviolet detection (HPLC-UV). In brief, sodium chloride was used as a separation reagent, in a small glass column, through which was passed a mixture of an aqueous solution of, for example, fruit juice and acetonitrile. In this process, the droplets rose through the column and a separated layer would be formed on the remained an aqueous phase. Following that, acetonitrile as the organic phase was mixed with 50.0 µL of 1-undecanol (extraction solvent). To further enrich the analytes, the mixture was injected into 5 mL of a 4% w/v sodium chloride solution and placed in a tube for the DLLME-SFO. Under optimal conditions, a dynamic linear range of 0.5-500 μg/L, extraction recovery of 65-85%, enrichment factors of 108-142, and limit of detection of 0.2-0.4 μg/L were obtained for the organophosphorus pesticides analysed. In addition, the repeatability and reproducibility from five replicate measurements of the pesticides (100 μg/L) were within the ranges of 3.5-5.1% and 4.5-6.3%, respectively . In this research, a new extraction method based on countercurrent salting out homogeneous liquid-liquid extraction combined with DLLME-SFO has been applied for the determination of pesticide residues in fruits, juice and environmental samples before using HPLC-UV analysis. The combined method not only leads to high enrichment factors, but can also be used in complex matrices (such as fruits, juices and high-salt solutions) without pre-treatment or dilution. Compared with other sample preparation methods, this analysis procedure has many advantages, including simplicity, ease of operation, high pre-enrichment factor, low detection limit and relatively short analysis time. Combination of CCSHLLE and DLLME-SFO was applied for the analysis of organophosphorous pesticide residues in fruit, fruit juices and environmental samples. The DLLME-SFO method avoided using high density and toxic extraction solvents. LODs are achievable at ng L-1 using CCSLLE-DLLME-SFO-HPLC-UV.

Teymori Z ，Sadeghi M ，Fattahi N 《-》

Development of a new extraction method based on counter current salting-out homogenous liquid-liquid extraction followed by dispersive liquid-liquid microextraction: Application for the extraction and preconcentration of widely used pesticides from fruit

In this paper, a new extraction method based on counter current salting-out homogenous liquid-liquid extraction (CCSHLLE) followed by dispersive liquid-liquid microextraction (DLLME) has been developed for the extraction and preconcentration of widely used pesticides in fruit juice samples prior to their analysis by gas chromatography-flame ionization detection (GC-FID). In this method, initially, sodium chloride as a separation reagent is filled into a small column and a mixture of water (or fruit juice) and acetonitrile is passed through the column. By passing the mixture sodium chloride is dissolved and the fine droplets of acetonitrile are formed due to salting-out effect. The produced droplets go up through the remained mixture and collect as a separated layer. Then, the collected organic phase (acetonitrile) is removed with a syringe and mixed with 1,1,2,2-tetrachloroethane (extraction solvent at µL level). In the second step, for further enrichment of the analytes the above mixture is injected into 5 mL de-ionized water placed in a test tube with conical bottom in order to dissolve acetonitrile into water and to achieve a sedimented phase at µL-level volume containing the enriched analytes. Under the optimal extraction conditions (extraction solvent, 1.5 mL acetonitrile; pH, 7; flow rate, 0.5 mL min(-1); preconcentration solvent, 20 µL 1,1,2,2-tetrachloroethane; NaCl concentration; 5%, w/w; and centrifugation rate and time, 5000 rpm and 5 min, respectively), the extraction recoveries and enrichment factors ranged from 87% to 96% and 544 to 600, respectively. Repeatability of the proposed method, expressed as relative standard deviations, ranged from 2% to 6% for intra-day (n=6, C=250 or 500 µg L(-1)) and inter-days (n=4, C=250 or 500 µg L(-1)) precisions. Limits of detection are obtained between 2 and 12 µg L(-1). Finally, the proposed method is applied for the determination of the target pesticide residues in the juice samples.

Farajzadeh MA ，Feriduni B ，Mogaddam MR 《-》

Combination of counter current salting-out homogenous liquid-liquid extraction and dispersive liquid-liquid microextraction as a novel microextraction of drugs in urine samples.

The counter current salting-out homogenous liquid-liquid extraction (CCSHLLE) joined with the dispersive liquid-liquid microextraction based on solidification of floating organic drop (DLLME-SFO) has been developed as a high preconcentration technique for the determination of different drugs in urine samples. Amphetamines were employed as model compounds to assess the extraction procedure and were determined by high performance liquid chromatography-ultraviolet detection (HPLC-UV). In this method, initially, NaCl as a separation reagent is filled into a small column and a mixture of urine and acetonitrile is passed through the column. By passing the mixture, NaCl is dissolved and the fine droplets of acetonitrile are formed due to salting-out effect. The produced droplets go up through the remained mixture and collect as a separated layer. Then, the collected acetonitrile is removed with a syringe and mixed with 30.0μL 1-undecanol (extraction solvent). In the second step, the 5.00mLK2CO3 solution (2% w/v) is rapidly injected into the above mixture placed in a test tube for further DLLME-SFO. Under the optimum conditions, calibration curves are linear in the range of 1-3000μgL(-1) and limit of detections (LODs) are in the range of 0.5-2μgL(-1). The extraction recoveries and enrichment factors ranged from 78 to 84% and 157 to 168, respectively. Repeatability (intra-day) and reproducibility (inter-day) of method based on seven replicate measurements of 100μgL(-1) of amphetamines were in the range of 3.5-4.5% and 4-5%, respectively. The method was successfully applied for the determination of amphetamines in the actual urine samples. The relative recoveries of urine samples spiked with amphetamine and methamphetamine are 90-108%.

Akramipour R ，Fattahi N ，Pirsaheb M ，Gheini S ... -  《-》

Combination of dispersive solid phase extraction with solidification organic drop-dispersive liquid-liquid microextraction based on deep eutectic solvent for extraction of organophosphorous pesticides from edible oil samples.

A dispersive solid phase extraction method was combined with deep eutectic solvent-based solidification of floating organic drop-dispersive liquid-liquid microextraction and used for the extraction/preconcentration of some organophosphorus pesticides residues from edible oil samples. The extracted analytes were quantified with gas chromatography-nitrogen phosphorous detector. In this procedure, the sample lipids are saponified with a sodium hydroxide solution and then the analytes are adsorbed onto a primary secondary amine sorbent. After that the analytes are desorbed with acetone as an elution/dispersive solvent and mixed with choline chloride: 3,3-dimethyl butyric acid deep eutectic solvent and the mixture is rapidly dispersed into deionized water. Then, the obtained cloudy solution is centrifuged and placed into an ice bath. The extraction solvent is solidified on the top of the solution. Finally, it is removed and dissolved in acetonitrile, and 1 µL of the solution is injected into the separation system. Validation of the method showed that limits of detection and quantification were in the ranges of 0.06-0.24 and 0.20-0.56 ng mL-1, respectively. Enrichment factors and extraction recoveries of the analytes ranged from 170-192 and 68-77%, respectively. The method had an acceptable precision with relative standard deviations less than ≤9.2% for intra- (n=6) and inter-day (n=6) precisions at four concentrations (3, 10, 50, and 250 ng mL-1, each analyte). Finally the method was used for determination of the analytes in five edible oil samples.

Zahiri E ，Khandaghi J ，Farajzadeh MA ，Afshar Mogaddam MR ... -  《-》

Determination of fungicides in fruit juice by ultrasound-assisted dispersive liquid-liquid microextraction based on solidification of floating organic solvent droplets followed by high performance liquid chromatography.

Fan RZ ，Liu C ，Jiang W ，Wang X ，Liu F ... -  《-》