Effect of inulin on rheological, textural, and structural properties of brown wheat flour dough and in vitro digestibility of developed Arabic bread.

The brown wheat flour (BWF)-based Arabic bread was fortified with chicory-derived inulin. The objective of this work was to assess the influence of the inulin concentration (1.25 to 5%) on the rheological, textural properties, and fermentation efficacy of enriched BWF dough. Farinographic measurement established that only 3.75% BWF can be substituted by inulin in a dough formulation, which resulted in lowering the water absorption capacity. The peak gelatinization temperature, Tp detected at 74.4 °C by rheometric measurement, which increased linearly with increasing the inulin concentration. The elastic modulus (G'), however, differed significantly among doughs with the addition of inulin. The dough hardness and compressibility increased as a function of inulin concentration. TPA measurement indicated that the Arabic bread fortified with 3.75% inulin was the best in texture. The addition of inulin improved the volume of CO2 generation in the yeasted dough. The distribution of starch particles on the top layer of bread surface was visualized through SEM. In-vitro digestion and steady-flow measurement of the BWF/inulin bread digesta exhibited a slow digestion and an increment in the apparent viscosity against the control bread, which further confirmed potential health benefits of the developed Arabic bread. PRACTICAL APPLICATION: Arabic bread is a staple food in many Asian countries, and an incorporation of soluble fiber, like inulin, definitely improves its health benefits. This work optimized a formulation based on BWF and inulin with technical feasibility. Rheological and textural studies demonstrated that blend bread could be made by replacing 3.75% BWF by inulin with significantly lower water content. Inulin has replaced the sugar in the yeasted dough, and carried out the bread fermentation adequately.

Ahmed J ，Thomas L ，Khashawi RA 《-》

Effects of whey and soy protein addition on bread rheological property of wheat flour.

The development of wheat-based foods that are enriched with proteins is increasingly popular due to consumer demand regarding food nutritional content and quality. This study was performed to compare the effect of whey and soy protein on the rheological properties of wheat dough and bread-making quality in a relatively wide range of protein addition (0-30%). We found that the incorporation of whey protein (WP) decreased dough stability time (MST), minimum torque (MMT), G' and G″, but increased dough peak torque (MPT), stickiness, G' and G″ in temperature sweep. With the increasing level of WP from 0 to 30%, the specific volume of bread initially decreased from 2.61 to 2.22 cm3 /g, then increased to 3.08 cm3 /g when WP was at higher concentration than gluten. However, the crumb hardness increased from 173 to 1291 g at the same time. As a contrast, the addition of soy protein (SP) increased dough MST, MMT, G' and G″, but decreased MPT, stickiness, G' and G″ in temperature sweep. With the increasing level of SP from 0 to 30%, the specific volume of bread decreased from 2.61 to 1.31 cm3 /g and the hardness first decreased from 173 to 152 g, then increased to 696 g. The results suggested that selection of the protein source and amount with appropriate functionalities played an important role in certain applications for protein fortified bakery products. Since it is known that the gluten network is responsible for viscoelastic properties in wheat dough and for dough structure strength and gas retention, most studies reported that enrichment of foreign proteins interfered with gluten development and therefore, had negative effects on bread quality. This study compared the effects of whey and soy proteins on the thermomechanical, dynamic rheological and microstructural properties of wheat dough and bread-making quality in a relatively wide range of protein addition (0-30%). The results suggested that selection of the protein source and amount with appropriate functionalities significantly affected the structure of the dough and quality of the bread. Our study is essential for product development and process control when considering the popularity of protein fortified bakery products.

Zhou J ，Liu J ，Tang X 《-》

Rheological and microstructural characterization of wheat dough formulated with konjac glucomannan.

This work aimed to investigate the effects of different levels of konjac glucomannan (KGM) on the thermomechanical and pasting properties, water distribution, gelatinization, texture, and microstructural characteristics of wheat flour and dough. The thermomechanical properties assessed with a Mixolab showed that KGM could increase the water absorption and degree of softening and decrease the stability time of wheat dough. In addition, wheat flour starch with KGM underwent significant (P < 0.05) gelatinization changes according to the rapid viscosity analyzer and differential scanning calorimetry results. These results demonstrated that KGM enhanced the thermal stability and anti-aging capacity of wheat flour. All doughs with KGM exhibited viscoelastic behavior but lower hardness and gumminess. Low-field nuclear magnetic resonance showed that water, with a tight binding force, migrated to the weaker binding forces in the dough. A noticeable disruption of the gluten network was observed at the highest level of KGM. However, an intermediate level of KGM addition (10 or 15 g kg-1 flour) still rendered dough with satisfactory properties. A certain amount of KGM could enhance the thermal stability and anti-aging ability of wheat flour, improve the viscoelastic behavior, and decrease the hardness and gumminess of dough. In general, the mixing of flour and dough with KGM addition of 10 or 15 g kg-1 flour was of good quality. © 2021 Society of Chemical Industry.

Meng K ，Gao H ，Zeng J ，Zhao J ，Qin Y ，Li G ，Su T ... -  《-》

Processing & rheological properties of wheat flour dough and bread containing high levels of soluble dietary fibres blends.

Wheat flour doughs were processed with soluble dietary fibres (DF) added up to 40% (w/w flour). DF were made of a ternary mixture of maltodextrins (MT, 3/5), pectins (PE, 1/5) and inulin (IN, 1/5). The addition of DF decreased the specific mechanical energy developed by the mixer, mainly because of water addition. It increased the ratio of storage moduli and the elongational viscosity of the dough, but decreased the strain hardening index. Energy input and rheological changes at mixing largely explained the decreases of porosity characteristic time and stability time during fermentation. It was possible to add up to 30% DF with a moderate increase of bread density, and 20%, with little change of crumb cellular structure. Hence, the changes of bread crumb texture were not mainly due to bread density, but rather likely to the changes of properties of the intrinsic material. Results obtained by addition of single fibre source, especially inulin, deviated from the main trends observed for texture and rheological properties. These results provide a good basis to design breads with increased dietary fibre content.

Arufe S ，Chiron H ，Doré J ，Savary-Auzeloux I ，Saulnier L ，Della Valle G ... -  《-》

Effects of the addition of waxy and normal hull-less barley flours on the farinograph and pasting properties of composite flours and on the nutritional value, textural qualities, and in vitro digestibility of resultant breads.

Hull-less barley (HLB), especially waxy HLB, contains many physiologically active ingredients; however, its poor processing performance and end-product quality are unfavorable. In this study, 80% waxy or normal HLB wholegrain flour (WGF) and 20% wheat flour were used for baking bread. The farinograph and pasting properties of composite powders, and the nutritional value, textural properties, and in vitro hydrolysis of resultant breads were evaluated. The addition of a high proportion of HLB WGFs significantly increased the nutritional value of breads, especially the β-glucan contents of waxy HLB breads. The addition of HLB WGFs and a suitable amount of wheat gluten led to a lower degree of softening of HLB bread flours but improved its farinograph characteristics, such as higher water absorption rate, development time, stability time, and farinograph quality number. Although the sensory profiles of HLB breads were considerably lower than those of wheat bread, they still received a good overall acceptability from a panel of sensory evaluators. HLB breads, particularly the waxy types, exhibited higher hardness, gumminess, chewiness, and lower specific volume, glycemic index and equilibrium concentration in starch hydrolysis. After baking, the starch crystallinity of dough changed from A to V type, and the relative crystallinity decreased. Overall, waxy HLB breads had more nutritional value than normal HLB breads. Higher β-glucan and total dietary fiber content in HLB might have a positive effect on the nutritional value of the resultant breads. However, high β-glucan and total dietary fiber was also accompanied by a negative effect on the sensory quality and processing performance of the end product. PRACTICAL APPLICATION: The composite flour with 80 g hull-less barley wholegrain flour, 20 g wheat flour, and 30 g wheat gluten can be substituted in breadmaking. Compared to wheat bread, hull-less barley bread exhibited different but acceptable sensory properties and had more nutritional value, particularly the waxy one. Therefore, a high proportion of hull-less barley could be recommended for bread production.

Liu J ，Li Q ，Zhai H ，Zhang Y ，Zeng X ，Tang Y ，Tashi N ，Pan Z ... -  《-》