Comparison of conventional BLUP and single-step genomic BLUP evaluations for yearling weight and carcass traits in Hanwoo beef cattle using single trait and multi-trait models.

Hanwoo, an important indigenous and popular breed of beef cattle in Korea, shows rapid growth and has high meat quality. Its yearling weight (YW) and carcass traits (backfat thickness, carcass weight- CW, eye muscle area, and marbling score) are economically important for selection of young and proven bulls. However, measuring carcass traits is difficult and expensive, and can only be performed postmortem. Genomic selection has become an appealing procedure for genetic evaluation of these traits (by inclusion of the genomic data) along with the possibility of multi-trait analysis. The aim of this study was to compare conventional best linear unbiased prediction (BLUP) and single-step genomic BLUP (ssGBLUP) methods, using both single-trait (ST-BLUP, ST-ssGBLUP) and multi-trait (MT-BLUP, MT-ssGBLUP) models to investigate the improvement of breeding-value accuracy for carcass traits and YW. The data comprised of 15,279 phenotypic records for YW and 5,824 records for carcass traits, and 1,541 genotyped animals for 34,479 single-nucleotide polymorphisms. Accuracy for each trait and model was estimated only for genotyped animals by five-fold cross-validation. ssGBLUP models (ST-ssGBLUP and MT-ssGBLUP) showed ~19% and ~36% greater accuracy than conventional BLUP models (ST-BLUP and MT-BLUP) for YW and carcass traits, respectively. Within ssGBLUP models, the accuracy of the genomically estimated breeding value for CW increased (19%) when ST-ssGBLUP was replaced with the MT-ssGBLUP model, as the inclusion of YW in the analysis led to a strong genetic correlation with CW (0.76). For backfat thickness, eye muscle area, and marbling score, ST- and MT-ssGBLUP models yielded similar accuracy. Thus, combining pedigree and genomic data via the ssGBLUP model may be a promising way to ensure acceptable accuracy of predictions, especially among young animals, for ongoing Hanwoo cattle breeding programs. MT-ssGBLUP is highly recommended when phenotypic records are limited for one of the two highly correlated genetic traits.

Mehrban H ，Lee DH ，Naserkheil M ，Moradi MH ，Ibáñez-Escriche N ... -  《PLoS One》

Multi-Trait Single-Step GBLUP Improves Accuracy of Genomic Prediction for Carcass Traits Using Yearling Weight and Ultrasound Traits in Hanwoo.

There has been a growing interest in the genetic improvement of carcass traits as an important and primary breeding goal in the beef cattle industry over the last few decades. The use of correlated traits and molecular information can aid in obtaining more accurate estimates of breeding values. This study aimed to assess the improvement in the accuracy of genetic predictions for carcass traits by using ultrasound measurements and yearling weight along with genomic information in Hanwoo beef cattle by comparing four evaluation models using the estimators of the recently developed linear regression method. We compared the performance of single-trait pedigree best linear unbiased prediction [ST-BLUP and single-step genomic (ST-ssGBLUP)], as well as multi-trait (MT-BLUP and MT-ssGBLUP) models for the studied traits at birth and yearling date of steers. The data comprised of 15,796 phenotypic records for yearling weight and ultrasound traits as well as 5,622 records for carcass traits (backfat thickness, carcass weight, eye muscle area, and marbling score), resulting in 43,949 single-nucleotide polymorphisms from 4,284 steers and 2,332 bulls. Our results indicated that averaged across all traits, the accuracy of ssGBLUP models (0.52) was higher than that of pedigree-based BLUP (0.34), regardless of the use of single- or multi-trait models. On average, the accuracy of prediction can be further improved by implementing yearling weight and ultrasound data in the MT-ssGBLUP model (0.56) for the corresponding carcass traits compared to the ST-ssGBLUP model (0.49). Moreover, this study has shown the impact of genomic information and correlated traits on predictions at the yearling date (0.61) using MT-ssGBLUP models, which was advantageous compared to predictions at birth date (0.51) in terms of accuracy. Thus, using genomic information and high genetically correlated traits in the multi-trait model is a promising approach for practical genomic selection in Hanwoo cattle, especially for traits that are difficult to measure.

Mehrban H ，Naserkheil M ，Lee D ，Ibáñez-Escriche N ... -  《Frontiers in Genetics》

Genomic evaluation of carcass traits of Korean beef cattle Hanwoo using a single-step marker effect model.

Hanwoo beef cattle are well known for the flavor and tenderness of their meat. Genetic improvement programs have been extremely successful over the last 40 yr. Recently, genomic selection was initiated in Hanwoo to enhance genetic progress. Routine genomic evaluation based on the single-step breeding value model was implemented in 2020 for all economically important traits. In this study, we tested a single-step marker effect model for the genomic evaluation of four carcass traits, namely, carcass weight (CW), eye muscle area, backfat thickness, and marbling score. In total, 8,023,666 animals with carcass records were jointly evaluated, including 29,965 genotyped animals. To assess the prediction stability of the single-step model, carcass data from the last 4 yr were removed in a forward validation study. The estimated genomic breeding values (GEBV) of the validation animals and other animals were compared between the truncated and full evaluations. A parallel conventional best linear unbiased prediction (BLUP) evaluation with either the full or the truncated dataset was also conducted for comparison with the single-step model. The estimates of the marker effect from the truncated evaluation were highly correlated with those from the full evaluation, ranging from 0.88 to 0.92. The regression coefficients of the estimates of the marker effect for the full and truncated evaluations were close to their expected value of 1, indicating unbiased estimates for all carcass traits. Estimates of the marker effect revealed three chromosomal regions (chromosomes 4, 6, and 14) harboring the major genes for CW in Hanwoo. For validation of cows or steers, the single-step model had a much higher R2 value for the linear regression model than the conventional BLUP model. Based on the regression intercept and slope of the validation, the single-step evaluation was neither inflated nor deflated. For genotyped animals, the estimated GEBV from the full and truncated evaluations were more correlated than the estimated breeding values from the two conventional BLUP evaluations. The single-step model provided a more accurate and stable evaluation over time.

Koo Y ，Alkhoder H ，Choi TJ ，Liu Z ，Reents R ... -  《-》

Genomic Prediction Using Alternative Strategies of Weighted Single-Step Genomic BLUP for Yearling Weight and Carcass Traits in Hanwoo Beef Cattle.

The weighted single-step genomic best linear unbiased prediction (GBLUP) method has been proposed to exploit information from genotyped and non-genotyped relatives, allowing the use of weights for single-nucleotide polymorphism in the construction of the genomic relationship matrix. The purpose of this study was to investigate the accuracy of genetic prediction using the following single-trait best linear unbiased prediction methods in Hanwoo beef cattle: pedigree-based (PBLUP), un-weighted (ssGBLUP), and weighted (WssGBLUP) single-step genomic methods. We also assessed the impact of alternative single and window weighting methods according to their effects on the traits of interest. The data was comprised of 15,796 phenotypic records for yearling weight (YW) and 5622 records for carcass traits (backfat thickness: BFT, carcass weight: CW, eye muscle area: EMA, and marbling score: MS). Also, the genotypic data included 6616 animals for YW and 5134 for carcass traits on the 43,950 single-nucleotide polymorphisms. The ssGBLUP showed significant improvement in genomic prediction accuracy for carcass traits (71%) and yearling weight (99%) compared to the pedigree-based method. The window weighting procedures performed better than single SNP weighting for CW (11%), EMA (11%), MS (3%), and YW (6%), whereas no gain in accuracy was observed for BFT. Besides, the improvement in accuracy between window WssGBLUP and the un-weighted method was low for BFT and MS, while for CW, EMA, and YW resulted in a gain of 22%, 15%, and 20%, respectively, which indicates the presence of relevant quantitative trait loci for these traits. These findings indicate that WssGBLUP is an appropriate method for traits with a large quantitative trait loci effect.

Mehrban H ，Naserkheil M ，Lee DH ，Cho C ，Choi T ，Park M ，Ibáñez-Escriche N ... -  《Genes》

Improving the accuracy of genomic evaluation for linear body measurement traits using single-step genomic best linear unbiased prediction in Hanwoo beef cattle.

Recently, there has been a growing interest in the genetic improvement of body measurement traits in farm animals. They are widely used as predictors of performance, longevity, and production traits, and it is worthwhile to investigate the prediction accuracies of genomic selection for these traits. In genomic prediction, the single-step genomic best linear unbiased prediction (ssGBLUP) method allows the inclusion of information from genotyped and non-genotyped relatives in the analysis. Hence, we aimed to compare the prediction accuracy obtained from a pedigree-based BLUP only on genotyped animals (PBLUP-G), a traditional pedigree-based BLUP (PBLUP), a genomic BLUP (GBLUP), and a single-step genomic BLUP (ssGBLUP) method for the following 10 body measurement traits at yearling age of Hanwoo cattle: body height (BH), body length (BL), chest depth (CD), chest girth (CG), chest width (CW), hip height (HH), hip width (HW), rump length (RL), rump width (RW), and thurl width (TW). The data set comprised 13,067 phenotypic records for body measurement traits and 1523 genotyped animals with 34,460 single-nucleotide polymorphisms. The accuracy for each trait and model was estimated only for genotyped animals using five-fold cross-validations. The accuracies ranged from 0.02 to 0.19, 0.22 to 0.42, 0.21 to 0.44, and from 0.36 to 0.55 as assessed using the PBLUP-G, PBLUP, GBLUP, and ssGBLUP methods, respectively. The average predictive accuracies across traits were 0.13 for PBLUP-G, 0.34 for PBLUP, 0.33 for GBLUP, and 0.45 for ssGBLUP methods. Our results demonstrated that averaged across all traits, ssGBLUP outperformed PBLUP and GBLUP by 33 and 43%, respectively, in terms of prediction accuracy. Moreover, the least root of mean square error was obtained by ssGBLUP method. Our findings suggest that considering the ssGBLUP model may be a promising way to ensure acceptable accuracy of predictions for body measurement traits, especially for improving the prediction accuracy of selection candidates in ongoing Hanwoo breeding programs.

Naserkheil M ，Lee DH ，Mehrban H 《BMC GENETICS》