Microplastic pollution in the rivers of the Tibet Plateau.

The Tibet Plateau, the so-called Third Pole of the world, is home to the headstreams of many great rivers. The levels of microplastic pollution in those rivers, however, are unknown. In this study, surface water and sediment samples were collected from six sampling sites along five different rivers. The surface water and sediment samples were collected with a large flow sampler and a stainless steel shovel, respectively. The abundance of microplastics ranged from 483 to 967 items/m3 in the surface water and from 50 to 195 items/kg in the sediment. A large amount of small, fibrous, transparent microplastics were found in this study. Five types of microplastics with different chemical compositions were identified using micro-Raman spectroscopy: polyethylene terephthalate (PET), polyethylene (PE), polypropylene (PP), polystyrene (PS), and polyamide (PA). These results demonstrate that rivers in the Tibet Plateau have been contaminated by microplastics, not only in developed areas with intense human activity but also in remote areas, where microplastic pollution requires further attention.

Jiang C ，Yin L ，Li Z ，Wen X ，Luo X ，Hu S ，Yang H ，Long Y ，Deng B ，Huang L ，Liu Y ... -  《-》

Microplastic pollution of lakeshore sediments from remote lakes in Tibet plateau, China.

Tibetan Plateau is known as the world's third pole, which is characterized by a low population density with very limited human activities. Tibetan Plateau possesses the greatest numbers of high-altitude inland lakes in the world. However, no information is currently available on the characteristic of microplastic pollution in those lakes within this remote area. In this work, lakeshore sediments from four lakes within the Siling Co basin in northern Tibet were sampled and examined for microplastics (<5 mm). Microplastics were detected in six out of seven sampling sites with abundances ranging from 8 ± 14 to 563 ± 1219 items/m2. Riverine input might have contributed to the high abundance of microplastics observed in this remote area. Morphological features suggest that microplastics are derived from the breakdown of daily used plastic products. Polyethylene, polypropylene, polystyrene, polyethylene terephthalate, and polyvinyl chloride were identified from the microplastic samples using laser Raman spectroscopy, and oxidative and mechanical weathering textures were observed on the surface of microplastics using scanning electron microscope. These results demonstrate the presence of microplastics even for inland lakes in remote areas under very low human impact, and microplastic pollution can be a global issue.

Zhang K ，Su J ，Xiong X ，Wu X ，Wu C ，Liu J ... -  《-》

Abundance and characteristics of microplastics in the mangrove sediment of the semi-enclosed Maowei Sea of the south China sea: New implications for location, rhizosphere, and sediment compositions.

Microplastic pollution of intertidal mangrove ecosystems is receiving growing attention, and scientists suspect that the microplastic pollution of semi-enclosed seas is significantly different from that of other coastal types because of their unique geographical features. However, data on the distributions and characteristics of microplastics in the mangrove sediment of semi-enclosed seas are very limited. This study selected the Maowei Sea, a typical semi-enclosed sea, as its representative study site. The analysis revealed that the microplastic abundances in the river estuaries were much lower than those at the oceanic entrance zones, with values ranging from 520 ± 8 to 940 ± 17 items/kg. Polyethylene (PE)/polypropylene (PP)/polystyrene (PS), white/transparent, and <1 mm were the dominant type, colour, and size of the microplastics, respectively, in the observed mangrove sediments. Moreover, some other factors, including the rhizosphere/non-rhizosphere and the proportion of organic matter, codetermined the distribution and characteristics of microplastics. Specifically: (1) the percentage of colorful microplastics were higher in the rhizosphere due to the microbial activities and (2) positive linear relationships were found between the pore volume (PV) values of the free particulate organic matter (FPOM), occluded particulate organic matter (OPOM) (1.6-2.0 g/cm3 and >2.0 g/cm3), and the abundance of very small microplastics (<1 mm).

Li R ，Zhang L ，Xue B ，Wang Y ... -  《-》

Comparisons of microplastic pollution between mudflats and sandy beaches in Hong Kong.

Most of the previous studies of microplastic pollution on coastal habitats focused on high energy beaches although low energy areas such as mudflats are supposed to retain more microplastics, not to mention that mudflats are biologically more diverse. We quantified and characterized microplastics from 10 mudflats and 10 sandy beaches in Hong Kong spanning from the eastern to western waters. Sediment samples were collected at 1.0 m and 1.5 m above chart datum (CD) and at the strandline. Abundance of microplastics ranged between 0.58 and 2116 items kg-1 sediment with that on mudflats being ten times more than on beaches. Polyethylene (46.9%) was the most abundant and followed by polypropylene (13.8%) and polyethylene terephthalate (13.5%). Expanded polystyrene was the most abundant in the strandline samples but not at 1.0 m and 1.5 m above CD. Although previous studies have concluded that the input from Pearl River is a major source of microplastics on Hong Kong shores, this study has demonstrated that the contribution of local pollution sources such as discharge from sewage treatment plants to microplastic pollution should not be neglected.

Lo HS ，Xu X ，Wong CY ，Cheung SG ... -  《-》

An optimized density-based approach for extracting microplastics from soil and sediment samples.

Microplastic pollution in the environment has received growing attention worldwide. A major impediment for accurate measurements of microplastics in environmental matrixes is to extract the particles. The most commonly-used method for separation from soil or sediment is flotation in dense liquid based on the relatively low density of plastic particles. This study provides an improved and optimized process for extraction of microplastic particles by modifying the floatation technique and floatation solution. Microplastics in soils and sediments are extracted by adding 200 g dry soil or sediment sample to 1.3 L mix of the saturated NaCl and NaI solutions in a volume ratio of 1:1 and aerating for 40 s then filtering the supernatant. The accuracy and precision of the new approach is validated by recovery experiments using soil and sediment samples spiked with six common microplastic compounds: polyethylene (PE), polyethylene terephthalate (PET), polypropylene (PP), polyvinyl chloride (PVC), polystyrene (PS) and expanded polystyrene (EPS), and comparison with the previous method. The optimized approach is further compared with the previous approach using the real soil and sediment samples.

Han X ，Lu X ，Vogt RD 《-》