Modeling and optimization of antibacterial activity of the chitosan-based hydrogel films using central composite design.

In the present study, hydrogel films composed of chitosan-poly(vinyl alcohol)-gelatin-thyme honey were successfully prepared by casting method, and their anti-bacterial properties were modeled and optimized. Antibacterial properties of the prepared films were analyzed by applying agar diffusion method. Staphylococcus aureus and Pseudomonas aeruginosa were tested as Gram-positive and Gram-negative bacteria, respectively. In order to obtain the composition of the film with maximum inhibition zone against both above-mentioned bacterial strains, the experiments were designed using response surface methodology based on five-level central composite design with four parameters, including concentrations of chitosan, poly(vinyl alcohol), gelatin, and honey. The results indicated that the prepared samples had good antibacterial activities against these two studied bacteria strains. Response surface method is conducted to develop mathematical models for process responses. Variance analysis on the experimental data shows that inhibition zone can be predicted effectively with quadratic models. In addition, swelling properties and rate of water vapor transmission of the prepared hydrogel films were studied. Due to the successful results, this hydrogel film has an excellent potential to be explored further as a wound healing material. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 104A: 2544-2553, 2016.

Lahooti B ，Khorram M ，Karimi G ，Mohammadi A ，Emami A ... -  《-》

Physical, antibacterial and antioxidant properties of chitosan films incorporated with thyme oil for potential wound healing applications.

Altiok D ，Altiok E ，Tihminlioglu F 《-》

Carboxyl-modified poly(vinyl alcohol)-crosslinked chitosan hydrogel films for potential wound dressing.

The objective of this study was to develop a novel carboxyl-modified poly(vinyl alcohol)-crosslinked chitosan hydrogel films for potential wound dressing. To prepare the crosslinked hydrogels, poly(vinyl alcohol) (PVA) was grafted with succinate acid to yield carboxyl-modified poly(vinyl alcohol) (PVA-COOH). Hydrogel films based on PVA-COOH and chitosan (CS) at different concentrations were crosslinked through the formation of amide linkages. The mechanical properties of these crosslinked hydrogel films in dry and swollen state were greatly improved with high swelling ratio. Water vapor and oxygen permeability evaluations indicated that crosslinked hydrogel films could maintain a moist environment over wound bed. Biocompatibility test showed the crosslinked hydrogels had no cytotoxicity and hemolytic potential. Gentamicin sulfate-loaded crosslinked hydrogel films showed sustained drug release profile, and could effectively suppress bacterial proliferation and protect wound from infection.

Zhang D ，Zhou W ，Wei B ，Wang X ，Tang R ，Nie J ，Wang J ... -  《-》

Evaluation of electrospun poly (vinyl alcohol)-based nanofiber mats incorporated with Zataria multiflora essential oil as potential wound dressing.

Infections, especially those caused by multi-drug resistant pathogens, result in serious problems in wound healing process. In this study, Zataria multiflora (ZM) essential oil, as a strong natural antimicrobial agent, is incorporated into poly (vinyl alcohol)-based nanofiber mats to fabricate a novel wound dressing. Different amounts of ZM essential oil (0, 2, 5 and 10% (v/v)) were incorporated into chitosan/poly(vinyl alcohol)/gelatin (CS/PVA/Gel) solutions and then were successfully electrospun into beadless and uniform fibers with 95 ± 14, 154 ± 27, 187 ± 40 and 218 ± 58 nm in diameters, respectively. The produced nanofiber mats (CS/PVA/Gel/ZM) were chemically crosslinked by glutaraldehyde vapor. The chemical compositions of ZM essential oil and nanofiber mats were analyzed using Gas Chromatography-Mass Spectrometry (GC-MS) and Fourier Transform Infrared Spectroscopy (FTIR), respectively. The antimicrobial activity of the CS/PVA/Gel/ZM nanofiber mats was determined by the AATCC100 method. The nanofiber mat loaded with 10% of ZM essential oil completely inhibited the growth of Staphylococcus aureus, Pseudomonas aeruginosa and Candida albicans after 24 h of incubation. Swelling investigations showed that the produced nanofibers have a substantial ability to take up water, in the range of 400-900%. Mechanical properties of the nanofiber mats were studied by tensile testing. Furthermore, they were found to be non-toxic by biocompatibility assays on mouse fibroblast (L929) cells. The obtained results have demonstrated that CS/PVA/Gel nanofiber mats, loaded with ZM essential oil, are promising alternatives to conventional wound dressings.

Ardekani NT ，Khorram M ，Zomorodian K ，Yazdanpanah S ，Veisi H ，Veisi H ... -  《-》

Fabrication of antibacterial chitosan-PVA blended film using electrospray technique for food packaging applications.

In this study, blended films from poly(vinyl alcohol) (PVA) containing chitosan (CS) were prepared via a simple solution casting and electrospraying method. The structures of the PVA-CS films were characterized by Fourier-transform infrared spectroscopy. The morphologies of the films were observed by scanning electron microscopy. The thermal properties of the PVA-CS films were examined by thermogravimetry. The effects of CS contents on the mechanical properties, oxygen permeability values, water vapor permeation levels, and antibacterial behaviors against Gram-negative (Escherichia coli) and Gram-positive (Staphylococcus aureus) strains were investigated. Compared to the pure PVA film, the PVA-CS films showed greater elongation at break, lower oxygen permeability, higher water barrier properties, and greater antibacterial activity, especially for the PVA:CS weight ratio of 75:25. The obtained results indicate the PVA-CS film may be a promising material for food packaging applications.

Liu Y ，Wang S ，Lan W 《-》