Increased dissolution and oral absorption of itraconazole/Soluplus extrudate compared with itraconazole nanosuspension.

The purpose of this article was to compare the in vitro and in vivo profiles of itraconazole (ITZ) extrudates and nanosuspension separately prepared by two different methods. And it was proved truly to form nanocrystalline and amorphous ITZ characterized by differential scanning calorimetry (DSC), X-ray powder diffraction (XRD) analysis, Fourier transform infrared spectrum (FTIR), transmission electron microscope (TEM), and scanning electron microscope (SEM). The release of ITZ/Soluplus solid dispersions with amorphous ITZ was almost complete while only 40% release was obtained with ITZ nanocrystals. The amorphous state need not to cross over the crystal lattice energy upon dissolution while the crystalline need to overcome it. In the in vivo assay, the AUC(0-t) and C(max) of ITZ/Soluplus were 6.9- and 11.6-time higher than those of pure ITZ. The formulation of the extrudate had an AUC(0-t) and C(max) similar to those of ITZ and also OH-ITZ compared with the commercial capsule (Sporanox®). The relative bioavailability values with their 95% confidence limit were calculated to be 98.3% (92.5-104.1%) and 101.3% (97.9-104.1%), respectively. The results of this study showed increased dissolution and bioavailability of the solid dispersion of Soluplus-based carrier loading ITZ prepared by HME compared with the ITZ nanosuspension prepared by wet milling.

Zhang K ，Yu H ，Luo Q ，Yang S ，Lin X ，Zhang Y ，Tian B ，Tang X ... -  《-》

Bioavailability enhancement of itraconazole-based solid dispersions produced by hot melt extrusion in the framework of the Three Rs rule.

Solid dispersion formulations made of itraconazole (ITZ) and Soluplus® (polyethylene glycol, polyvinyl acetate and polyvinylcaprolactame-based graft copolymer abbreviated SOL) were produced using hot melt extrusion. Since ITZ possesses a water solubility of less than 1ng/mL, the aim of this work was to enhance the aqueous solubility of ITZ, and thereby improve its bioavailability. The three formulations consisted of a simple SOL/ITZ amorphous solid dispersion (ASD), an optimized SOL/ITZ/AcDiSol® (super-disintegrant) ASD and an equimolar inclusion complex of ITZ in hydroxypropyl-β-cyclodextrin (substitution degree=0.63, CD) with SOL. The three formulations were compared in vitro and in vivo to the marketed product Sporanox®. The in vitro enhancement of dissolution rate was evaluated using a biphasic dissolution test. In vitro dissolution results showed that all three formulations had a higher percentage of ITZ released than Sporanox® with the following ranking: SOL/ITZ/CD>SOL/ITZ/AcDiSol®>SOL/ITZ>Sporanox®. The bioavailability of these four formulations was evaluated in rats. The bioanalytical method was optimized so that only 10μL of blood was withdrawn from the rats using specific volumetric absorptive microsampling devices. This enabled to keep the same rats during the whole study, which was in accordance with the Three Rs rules (reduction, refinement and replacement). Furthermore, this technique allowed the suppression of inter-individual variability. Higher Cmax and AUC were obtained after the administration of all three formulations compared to the levels after the use of Sporanox® as follows: SOL/ITZ/AcDiSol®>SOL/ITZ/CD>SOL/ITZ>Sporanox®. The inversion in the ranking between SOL/ITZ/CD and SOL/ITZ/AcDiSol® made impossible the establishment of an in vitro-vivo correlation. Indeed, very different release rates were obtained in vitro and in vivo for the two optimized formulations. These results suggest that ITZ would be protected inside the core of the SOL micelles even during the absorption step at the intestine, while some agents present in the intestinal fluids could displace ITZ from the hydrophobic cavity of CD by competition.

Thiry J ，Kok MG ，Collard L ，Frère A ，Krier F ，Fillet M ，Evrard B ... -  《-》

Itraconazole solid dispersion prepared by a supercritical fluid technique: preparation, in vitro characterization, and bioavailability in beagle dogs.

Yin X ，Daintree LS ，Ding S ，Ledger DM ，Wang B ，Zhao W ，Qi J ，Wu W ，Han J ... -  《Drug Design Development and Therapy》

Design of spray dried ternary solid dispersions comprising itraconazole, soluplus and HPMCP: Effect of constituent compositions.

A range of 17 ternary formulations of itraconazole (ITZ), HPMCP and Soluplus have been manufactured using spray drying. These amorphous solid dispersions (ASDs) were very stable against crystallisation and ITZ was found to be amorphous in all formulations after one year at 40°C/75% RH. A number of solid state analytical techniques including PXRD, DSC, small angle X-ray scattering, FTIR and solid state NMR were used to characterise the physicochemical properties of the ASDs following processing and storage and to assess any interactions between components. Microtrac laser scattering analysis revealed a relationship between polymer levels and particle size distribution (PSD). Dissolution studies indicated that higher Soluplus content in the formulation resulted in higher concentrations of ITZ in acidic media.

Davis MT ，Potter CB ，Mohammadpour M ，Albadarin AB ，Walker GM ... -  《-》

Hot-melt extrusion for enhanced delivery of drug particles.

With the recent advent of nanotechnology for pharmaceutical applications, drug particle engineering is the focus of increasing interest as a viable approach for overcoming solubility limitations of poorly water-soluble drugs. Although these particle engineering techniques have been proven successful for enhancing the dissolution properties of many poorly water-soluble drugs, there are limitations associated with them such as particle aggregation, morphological instability, and poor wettability. The aim of this study was to demonstrate a processing technique in which hot-melt extrusion (HME) is utilized to overcome these limitations. Micronized particles of amorphous itraconazole (ITZ) stabilized with PVP or HPMC were produced and subsequently melt extruded with poloxamer 407 and PEO 200 M to deaggregate and disperse the particles into the hydrophilic polymer matrix. Differential scanning calorimetry, X-ray diffraction, and scanning electron microscopy were used to demonstrate that the HME process did not alter the properties of the micronized particles. Dissolution testing conducted at sink conditions revealed that the dissolution rate of the micronized particles was improved by HME due to particle deaggregation and enhanced wetting. Supersaturation dissolution testing demonstrated that the ITZ-HPMC micronized particle extrudates provided superior supersaturation of ITZ compared to the ITZ-PVP micronized particle extrudates. Supersaturation dissolution testing incorporating a pH change (from pH 1.2 to 6.8 at 2 h) revealed that neither micronized particle extrudate formulation significantly reduced the rate of ITZ precipitation from supersaturated solution once pH was increased. Moreover, the two extrudate formulations performed very similarly when only considering dissolution testing from just before pH adjustment through the duration of testing at neutral pH. From oral dosing of rats, it was determined that the two extrudate formulations performed similarly in vivo as confirmed by their statistically equivalent AUC values. By correlating the results of supersaturation dissolution testing with pH change to the in vivo AUC, it appears that rapid precipitation of ITZ occurs upon entrance into the more neutral pH environment of the small intestine resulting in a brief opportunity for absorption. This suggests that perhaps the optimum formulation approach for ITZ is to control drug release so as to retard precipitation as pH is increased and extend the absorption window in the small intestine.

Miller DA ，McConville JT ，Yang W ，Williams RO 3rd ，McGinity JW ... -  《JOURNAL OF PHARMACEUTICAL SCIENCES》