Evaluation of Gafchromic® EBT3 films characteristics in therapy photon, electron and proton beams.

To evaluate the uncertainties and characteristics of radiochromic film-based dosimetry system using the EBT3 model Gafchromic(®) film in therapy photon, electron and proton beams. EBT3 films were read using an EPSON Expression 10000XL/PRO scanner. They were irradiated in five beams, an Elekta SL25 6 MV and 18 MV photon beam, an IBA 100 MeV 5 × 5 cm(2) proton beam delivered by pencil-beam scanning, a 60 MeV fixed proton beam and an Elekta SL25 6 MeV electron beam. Reference dosimetry was performed using a FC65-G chamber (Elekta beam), a PPC05 (IBA beam) and both Markus 1916 and PPC40 Roos ion-chambers (60 MeV proton beam). Calibration curves of the radiochromic film dosimetry system were acquired and compared within a dose range of 0.4-10 Gy. An uncertainty budget was estimated on films irradiated by Elekta SL25 by measuring intra-film and inter-film reproducibility and uniformity; scanner uniformity and reproducibility; room light and film reading delay influences. The global uncertainty on acquired optical densities was within 0.55% and could be reduced to 0.1% by placing films consistently at the center of the scanner. For all beam types, the calibration curves are within uncertainties of measured dose and optical densities. The total uncertainties on calibration curve due to film reading and fitting were within 1.5% for photon and proton beams. For electrons, the uncertainty was within 2% for dose superior to 0.8 Gy. The low combined uncertainty observed and low beam and energy-dependence make EBT3 suitable for dosimetry in various applications.

Sorriaux J ，Kacperek A ，Rossomme S ，Lee JA ，Bertrand D ，Vynckier S ，Sterpin E ... -  《-》

SU-E-T-118: Characterization of EBT3 Films in Photon and Proton Beams.

To measure the calibration curves of EBT3 dosimetry films in photon and proton beams and to quantify the related uncertainties from one beam type to another. EBT3 Gafchromic films have similar properties than EBT2 with a symmetric construction and a matte polyester substrate to prevent Newton's ring artefacts. Films from a same batch were exposed in three different beam qualities, an Elekta SL25 6 MV photon beam, a 100 MeV 5×5cm2 proton beam delivered by pencil-beam scanning dedicated system from IBA and a 60 MeV fixed proton beam (2.5cm in diameter) at Clatterbridge Center for Oncology (CCO), UK. The films were read using an EPSON 10000 XL/PRO scanner. Film calibration curves were acquired for all modalities within a range of 0.05 to 20 Gy. Influence of increasing linear-energy transfer (LET) on film response was investigated by comparing dose measured by EBT3 to a silicon diode detector in depth for a fully-modulated beam using the CCO beam line (homogeneous dose with distal end at 3.1cm in water). A comprehensive uncertainty budget (reproducibility, uniformity'¦) was estimated on films irradiated by Elekta SL25. The main source of uncertainty was the non-uniformity of the scanner response. By placing all the irradiated films at the center of the scanner, the uncertainty could be reduced from 5.8% to 1.9% (1 sigma). For all beams and energies, the calibration curves were matched within uncertainties. Along the fully-modulated depth dose curve, diode and EBT3 measurement were in a 4% agreement point-to-point, indicating films weak dependence with LET. The weak influence of LET, beam type and energy on film response as well as its small uncertainty make EBT3 suitable for relative dosimetry and a promising candidate for measuring correction factors (quality, recombination,'¦) for reference dosimetry with ion chambers of non-standard beams (e.g pencil-beam scanning proton-therapy). “This work is supported by the Walloon Region under the project name InVivoIGT, convention number 1017266.â€.

Sorriaux J ，Rossomme S ，Kacperek A ，Bertrand D ，Vynckier S ，Sterpin E ... -  《-》

Calibration of GafChromic EBT3 for absorbed dose measurements in 5 MeV proton beam and (60)Co γ-rays.

Vadrucci M ，Esposito G ，Ronsivalle C ，Cherubini R ，Marracino F ，Montereali RM ，Picardi L ，Piccinini M ，Pimpinella M ，Vincenti MA ，De Angelis C ... -  《-》

High dose-per-pulse electron beam dosimetry: Usability and dose-rate independence of EBT3 Gafchromic films.

The aim of this study was to assess the suitability of Gafchromic EBT3 films for reference dose measurements in the beam of a prototype high dose-per-pulse linear accelerator (linac), capable of delivering electron beams with a mean dose-rate (Ḋm ) ranging from 0.07 to 3000 Gy/s and a dose-rate in pulse (Ḋp ) of up to 8 × 106 Gy/s. To do this, we evaluated the overall uncertainties in EBT3 film dosimetry as well as the energy and dose-rate dependence of their response. Our dosimetric system was composed of EBT3 Gafchromic films in combination with a flatbed scanner and was calibrated against an ionization chamber traceable to primary standard. All sources of uncertainties in EBT3 dosimetry were carefully analyzed using irradiations at a clinical radiotherapy linac. Energy dependence was investigated with the same machine by acquiring and comparing calibration curves for three different beam energies (4, 8 and 12 MeV), for doses between 0.25 and 30 Gy. Ḋm dependence was studied at the clinical linac by changing the pulse repetition frequency (f) of the beam in order to vary Ḋm between 0.55 and 4.40 Gy/min, while Ḋp dependence was probed at the prototype machine for Ḋp ranging from 7 × 103 to 8 × 106 Gy/s. Ḋp dependence was first determined by studying the correlation between the dose measured by films and the charge of electrons measured at the exit of the machine by an induction torus. Furthermore, we compared doses from the films to independently calibrated thermo-luminescent dosimeters (TLD) that have been reported as being dose-rate independent up to such high dose-rates. We report that uncertainty below 4% (k = 2) can be achieved in the dose range between 3 and 17 Gy. Results also demonstrated that EBT3 films did not display any detectable energy dependence for electron beam energies between 4 and 12 MeV. No Ḋm dependence was found either. In addition, we obtained excellent consistency between films and TLDs over the entire Ḋp range attainable at the prototype linac confirming the absence of any dose-rate dependence within the investigated range (7 × 103 to 8 × 106 Gy/s). This aspect was further corroborated by the linear relationship between the dose-per-pulse (Dp ) measured by films and the charge per pulse (Cp ) measured at the prototype linac exit. Our study shows that the use of EBT3 Gafchromic films can be extended to reference dosimetry in pulsed electron beams with a very high dose rate. The measurement results are associated with an overall uncertainty below 4% (k = 2) and are dose-rate and energy independent.

Jaccard M ，Petersson K ，Buchillier T ，Germond JF ，Durán MT ，Vozenin MC ，Bourhis J ，Bochud FO ，Bailat C ... -  《-》

Radiochromic film calibration for low-energy seed brachytherapy dose measurement.

Morrison H ，Menon G ，Sloboda RS 《-》