Synthesis, characterization, and osteocompatibility evaluation of novel alanine-based polyphosphazenes.

This study deals with the synthesis and in vitro osteocompatibility evaluation of two novel alanine-containing biodegradable ester polyphosphazenes as candidates to form self-setting composites with hydroxyapatite (HAp) precursors. The two novel biodegradable polyphosphazenes synthesized were poly[(ethyl alanato)1.0(ethyl oxybenzoate)1.0 phosphazene] (PN-EA/EOB) and poly[(ethyl alanato)1.0(propyl oxybenzoate)1.0 phosphazene] (PN-EA/POB). The polymers were characterized by multinuclear magnetic resonance (NMR), differential scanning calorimetry (DSC), and gel permeation chromatography (GPC). Biodegradability and percentage water absorption of the polymers were evaluated by following the mass change in phosphate buffer (pH 7.4) at 37 degrees C. PN-EA/POB underwent faster degradation and showed higher water absorption compared to PN-EA/EOB. Both polymers became insoluble in common organic solvents following hydrolysis presumably due to crosslinking reactions accompanying the degradation process. Osteoblast cell adhesion and proliferation on PN-EA/EOB and PN-EA/POB was followed by scanning electron microscopy (SEM) and by using a biochemical assay. Both PN-EA/EOB and PN-EA/POB supported the adhesion and proliferation of primary rat osteoblast cells in vitro. Furthermore, the enzymatic activity of the osteoblast cells cultured on the polymers was confirmed by the alkaline phosphatase activity. Thus, these biodegradable amino-acid-based polyphosphazenes are promising new materials for forming self-setting bone cements.

Nair LS ，Lee DA ，Bender JD ，Barrett EW ，Greish YE ，Brown PW ，Allcock HR ，Laurencin CT ... -  《JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A》

Low temperature formation of hydroxyapatite-poly(alkyl oxybenzoate)phosphazene composites for biomedical applications.

The formation of biodegradable composites which may be suitable as bone analogs is described. Polyphosphazene-hydroxyapatite (HAp) composites were produced via an acid-base reaction of tetracalcium phosphate and anhydrous dicalcium phosphate in the presence of polyphosphazenes bearing alkyl ester containing side-groups. The polyphosphazenes used were poly(ethyl oxybenzoate)phosphazene (PN-EOB) and poly(propyl oxybenzoate) phosphazene (PN-POB). The effects of temperature and the proportions of polymers, PN-EOB and PN-POB on the kinetics, reaction chemistry and phase evolution during the formation of stoichiometric HAp were studied. Kinetics, phase evolution and microstructural development were evaluated using isothermal calorimetry, X-ray diffraction and scanning electron microscopy, respectively. Analysis of solution chemistry revealed that the increases in the pH during the formation of SHAp, resulted in partial hydrolysis of the polymer surfaces, which led in turn to the formation of a calcium cross-linked polymer surface. The calcium cross-linked polymer surface appeared to facilitate the nucleation and growth of apatite deposits on the polymer. The current study illustrates the in situ formation of HAp in the presence of polyphosphazenes, where HAp is chemically bonded to the polymer.

Greish YE ，Bender JD ，Lakshmi S ，Brown PW ，Allcock HR ，Laurencin CT ... -  《BIOMATERIALS》

Effect of side group chemistry on the properties of biodegradable L-alanine cosubstituted polyphosphazenes.

Singh A ，Krogman NR ，Sethuraman S ，Nair LS ，Sturgeon JL ，Brown PW ，Laurencin CT ，Allcock HR ... -  《BIOMACROMOLECULES》

Miscibility of choline-substituted polyphosphazenes with PLGA and osteoblast activity on resulting blends.

The preparation of phosphazene tissue engineering scaffolds with bioactive side groups has been accomplished using the biological buffer, choline chloride. Mixed-substituent phosphazene cyclic trimers (as model systems) and polymers with choline chloride and glycine ethyl ester, alanine ethyl ester, valine ethyl ester, or phenylalanine ethyl ester were synthesized. Two different synthetic protocols were examined. A sodium hydride mediated route resulted in polyphosphazenes with a low choline content, while a cesium carbonate mediated process produced polyphosphazenes with higher choline content. The phosphazene structures and physical properties were studied using multinuclear NMR, differential scanning calorimetry (DSC), and gel permeation chromatography (GPC) techniques. The resultant polymers were then blended with PLGA (50:50) or PLGA (85:15) and characterized by DSC analysis and scanning electron microscopy (SEM). Polymer products obtained via the sodium hydride route produced miscible blends with both ratios of PLGA, while the cesium carbonate route yielded products with reduced blend miscibility. Heterophase hydrolysis experiments in aqueous media revealed that the polymer blends hydrolyzed to near-neutral pH media (∼5.8 to 6.8). The effect of different molecular structures on cellular adhesion showed osteoblast proliferation with an elevated osteoblast phenotype expression compared to PLGA over a 21-day culture period.

Weikel AL ，Owens SG ，Morozowich NL ，Deng M ，Nair LS ，Laurencin CT ，Allcock HR ... -  《-》

In vivo biodegradability and biocompatibility evaluation of novel alanine ester based polyphosphazenes in a rat model.

Sethuraman S ，Nair LS ，El-Amin S ，Farrar R ，Nguyen MT ，Singh A ，Allcock HR ，Greish YE ，Brown PW ，Laurencin CT ... -  《JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A》